Testing machines—General requirements
General requirements for the testing machine
The model description does not specify the edition year.

ID: 00010
Tensile testing of steel strand with fixtures matched to its diameter.
Materials: Metals
A 1000 kN tensile machine for steel strand used in prestressed structures. It applies axial tensile loading to a specimen secured at both ends in dedicated fixtures.
The test assesses a strand’s resistance to tensile loading under the selected procedure. End anchorage needs particular attention because failure at the gripping point may distort the assessment of the material itself.
The servo-hydraulic loading system uses a six-column frame. Selection takes account of strand diameter, specimen length and the gripping arrangement. Strand fixtures must be checked separately: a sufficient machine capacity alone does not establish grip compatibility with a particular specimen.
| Parameter | Value |
|---|---|
| Tensile capacity | 1000 kN |
| Accuracy class | 1 |
| Tensile space | 1100 mm |
| Force indication error | ±1% |
| Force measuring range | 4–100% FS |
| Strand diameter for listed fixtures | 15.2 mm |
| Piston travel | 200 mm |
| Lower grip positioning speed | 300 mm/min |
| Power supply | 380 V ±10% |
| Power | 1.5 kW |
| Control cabinet, L × W × H | 600 × 650 × 1400 mm |
| Control cabinet mass | 300 kg |
| Effective test width | 490 mm |
| Test frame, L × W × H | 780 × 540 × 2600 mm |
| Mass stated in table | 2100 kg |
Normative references stated in the technical description of this model.
General requirements for the testing machine
The model description does not specify the edition year.
Requirements for a servo-hydraulic universal machine
The model description does not specify the edition year.
Room-temperature tensile testing of metals
The model description does not specify the edition year.
To be confirmed for the selected model. Standard supply, grips, fixtures and options are listed separately for the selected configuration.