Equipment catalogue

Equipment

Constant-head permeameter BT 70

ID: 00073

Constant-head permeameter BT 70

For determining the permeability coefficient of sandy and non-cohesive soils under constant head.

Materials: Soil

Instrument dimensions400×226×146mm
Cylinder internal diameter
Dia100mm
Cylinder height
400mm
Soil shrinkage limit set BT STSXY-1

ID: 00076

Soil shrinkage limit set BT STSXY-1

For determining the moisture content below which drying causes no further soil shrinkage.

Materials: Soil

Shrinkage dishes2; 45 mm diameter×12.7 mm high
Crystallizing dish
1; 57 mm diameter×31 mm deep
Pronged plate
Transparent acrylic with 3 metal prongs
Soil plastic limit set BT STSXY-2

ID: 00077

Soil plastic limit set BT STSXY-2

For determining soil moisture content at the boundary between plastic and semi-solid states.

Materials: Soil

Glass rolling plate1; 300×300 mm
Rod
1; stainless steel, 3 mm diameter
Mixing dish
1; 120 mm diameter
Soil linear shrinkage mould

ID: 00078

Soil linear shrinkage mould

For determining soil linear shrinkage from the change in specimen length during drying.

Materials: Soil

Internal mould dimensions140mm long, 12.5mm radius
Soil fraction preparation sieve
425um
CBR testing machine BT STCBR-1

ID: 00094

CBR testing machine BT STCBR-1

For determining the California bearing ratio of soils and pavement materials.

Materials: Soil

Maximum load capacities listed30kN,50kN
Test speed
1 mm/min or 1.27 mm/min
Penetration rod size
Dia. 50×100mm
Treton impact tester BT STCJ-1

ID: 00110

Treton impact tester BT STCJ-1

For impact testing of a specimen in a cylindrical chamber.

Materials: Not assigned

Cylinder internal diameterφ102mm
Cylinder external diameter
φ114mm
Cylinder internal height
450mm
Hot Air Circulation Oven

ID: 00124

Hot Air Circulation Oven

Dries soil samples in a chamber with circulating hot air.

Materials: Soil

Temperature uniformity±2.0%
Temperature accuracy
±1℃
Air circulation
Double, laterally cyclic
Soil Sieve Set

ID: 00163

Soil Sieve Set

Separates soil into particle-size fractions.

Materials: Soil

Sieve diametersφ200mm,φ300mmφ400mm
Aperture sizes
0.075mm, 0.1mm, 0.25mm, 0.5mm, 1mm, 2mm, 5mm, 10mm, 20mm
Grid Sieves

ID: 00164

Grid Sieves

Separate soil material by particle size.

Materials: Soil

Manufacturer-listed sizes2.5mm、3.15mm、12.5mm 、4mm、16mm、5mm、20mm、6.3mm、25mm、8mm、31.5mm、10mm、40mm
Proving Ring

ID: 00168

Proving Ring

Measures force in mechanical testing.

Materials: Soil

Nominal loads1KN 2KN 5KN 30KN 50KN 100KN 200KN 300KN 500KN 1000KN 2000KN 3000KN 5000KN 10000KN
Sample Tray

ID: 00172

Sample Tray

Holds soil samples during preparation.

Materials: Soil

Large tray490mm×360mm
Medium tray
380mm×270mm
Small tray
260mm×180mm
Desiccator

ID: 00174

Desiccator

Holds dried soil samples during cooling and storage in an enclosed space.

Materials: Soil

Diameters300mm; 240mm
Dial Displacement Gauge

ID: 00178

Dial Displacement Gauge

Measures linear displacement during laboratory testing.

Materials: Soil

Range/second parameter, entry 10-1mm/0.001mm
Range/second parameter, entry 2
0-10mm/0.01mm
Range/second parameter, entry 3
0-30mm/0.01mm
Digital CBR Tester BT STCBR-3A

ID: 00198

Digital CBR Tester BT STCBR-3A

Determines CBR bearing capacity of soil and base materials.

Materials: Soil

Maximum load, source-listed alternatives30kN,50kN
Test speed
1 mm/min; 1.27 mm/min
Penetration plunger dimensions
Dia. 50×100mm
CBR Tester BT STCBR-1A

ID: 00207

CBR Tester BT STCBR-1A

Determines CBR bearing capacity of soil and base materials.

Materials: Soil

Maximum load, source-listed alternatives30kN,50kN
Test speed
1 mm/min; 1.27 mm/min
Penetration plunger dimensions
Dia. 50×100mm
Soil Resistivity Tester

ID: 00210

Soil Resistivity Tester

Measures soil resistivity and earth-system parameters.

Materials: Soil

Earth resistance range0.00Ω~30.00kΩ
Power supply
DC 7.4V 2600mAh; full of about 8.4V
Maximum test current
20mA
Non-nuclear soil density meter BT W210A

ID: 00246

Non-nuclear soil density meter BT W210A

Non-nuclear density and moisture measurement of compacted soil.

Materials: Soil

Detection depth, source wordingStandard 150, maximum sounding depth 300
Wet density accuracy
0-2% of standard test
Water content accuracy
0-3% of the standard
Aggregate crushing value apparatus BT STYS-2

ID: 00256

Aggregate crushing value apparatus BT STYS-2

For containing and loading an aggregate specimen in the crushing value test.

Materials: Aggregates

Cylinder internal diameter — nominal 150 mm assembly154±0.5 mm
Cylinder internal depth — nominal 150 mm assembly
125 to 140 mm
Cylinder minimum wall thickness — nominal 150 mm assembly
16.0 mm
Aggregate test sieves

ID: 00287

Aggregate test sieves

For determining the particle-size distribution of sand and coarse aggregate.

Materials: Aggregates

Listed standardASTM-E11/95
Frame diameter and height, option 1
φ200mm, 50mm height
Frame diameter and height, option 2
φ300mm, 60mm height
Aggregate density baskets

ID: 00289

Aggregate density baskets

For holding an aggregate sample during density determination by submerged weighing.

Materials: Aggregates

Basket size, option 1200mm×200mm
Basket size, option 2
150mm×150mm
Basket size, option 3
100mm×150mm
Engler viscometer BT STEGL-2

ID: 00329

Engler viscometer BT STEGL-2

For determining the efflux viscosity of petroleum products and other compatible liquids.

Materials: Bitumen

Standard water time51±1 s
Test temperature
Room temperature to 100 °C
Temperature accuracy
±1 °C
Saybolt viscometer BT STSBT-1

ID: 00334

Saybolt viscometer BT STSBT-1

For viscosity determination from the efflux time of a heated specimen.

Materials: Bitumen

Receiving flask volume60±0.05ml
Bath temperature
Room temperature∼240.0℃
Temperature control accuracy
±0.1℃
Soxhlet extractor BT STCQ-2

ID: 00392

Soxhlet extractor BT STCQ-2

For determining solvent-extractable components of laboratory specimens.

Materials: Not assigned

Number of specimens3
Flask volume, optional
500mL
Power supply
AC220V 50Hz
Cement mortar mixer BT STJBJ-5

ID: 00522

Cement mortar mixer BT STJBJ-5

Prepares cement mortar for subsequent specimen production and testing.

Materials: Cement

Blade rotation, low speed140±5 rpm
Blade rotation, high speed
285±10 rpm
Orbital revolution, low speed
62±5 rpm
Laboratory pH meter BT 25

ID: 00545

Laboratory pH meter BT 25

Measures pH of aqueous solutions in laboratory work.

Materials: Not assigned

Instrument grade0.1
Measuring range
0.0–14.0 pH
Stated measuring precision
0.1 pH
Chloride-ion tester BT D

ID: 00547

Chloride-ion tester BT D

Supports sample treatment and chloride determination using heating and distillation.

Materials: Cement

Heating power1000 W
Temperature control range
250–260 °C
Air-flow velocity, as published
100–200 m/min
Laboratory resistance furnace BIG TEST

ID: 00555

Laboratory resistance furnace BIG TEST

Heats small specimens and items in a chamber for laboratory treatment.

Materials: Not assigned

Rated temperature, family range950-1300 °C
Chamber dimensions
300×200×120 mm
Rated power, family range
2-8 kW
Cement mortar mixer BT JJ-5

ID: 00569

Cement mortar mixer BT JJ-5

Prepares cement mortar for specimen moulding and subsequent testing.

Materials: Cement

Blade rotation, low / high speed140±5 / 285±10 r/min
Planetary revolution, low / high speed
62±5 / 125±10 r/min
Motor power
0.370 / 0.55 kW

Choose language

РусскийEnglish

Choose country

Supply countries

Search equipment

Basket