
ID: 00001
Concrete pull-out tester MIT STOUN 55
Determines in-situ concrete strength from anchor pull-out force. Maximum force: 55 kN.
Materials: Concrete
- Working load range
- 5.5–55 kN
- Load measurement error
- ±1 %
Quality equipment at accessible prices. Selected for your tasks, with support to keep your instruments working.
Choose your applicationExplore equipment
Choose a material or testing application, then explore the relevant equipment groups.

ID: 00001
Determines in-situ concrete strength from anchor pull-out force. Maximum force: 55 kN.
Materials: Concrete

ID: 00013
Automatically controlled compression tests of cement, concrete and rock.
Materials: Cement, Concrete, Rock

ID: 00014
Compression and flexural strength testing of cement specimens on one system.
Materials: Cement

ID: 00021
Tension, compression and other mechanical tests with method-specific fixtures.
Materials: Not assigned

ID: 00006
Tensile testing of metal specimens; compression and bending with suitable fixtures.

ID: 00007
Tensile testing of metal specimens; compression and bending with suitable fixtures.

ID: 00008
Tensile testing of metal specimens; compression and bending with suitable fixtures.

ID: 00009
Tensile testing of metal specimens; compression and bending with suitable fixtures.

ID: 00010
Tensile testing of steel strand with fixtures matched to its diameter.
Materials: Metals

ID: 00011
Tensile testing of reinforcing steel and strand with specimen-specific fixtures.

ID: 00012
Tensile testing of reinforcing steel and strand with specimen-specific fixtures.

ID: 00015
Compression strength tests of cement, concrete and rock with digital load indication.
Materials: Cement, Concrete, Rock

ID: 00016
Vertical load-bearing tests of prefabricated ventilation duct products.
Materials: Cement

ID: 00017
Compression and flexural testing of concrete kerbstones and paving products.
Materials: Concrete

ID: 00018
Compression tests of cement, concrete and rock with computer-controlled loading.
Materials: Cement, Concrete, Rock

ID: 00019
Compression tests of cement, concrete and rock with computer-controlled loading.
Materials: Cement, Concrete, Rock

ID: 00020
Tension, compression and other mechanical tests with method-specific fixtures.
Materials: Not assigned

ID: 00022
Tension, compression and other mechanical tests with method-specific fixtures.
Materials: Not assigned

ID: 00023
Tension, compression and other mechanical tests with method-specific fixtures.
Materials: Not assigned

ID: 00024
Ring stiffness determination for thermoplastics pipes under compression.
Materials: Plastics

ID: 00025
Ring stiffness determination for thermoplastics pipes under compression.
Materials: Plastics

ID: 00026
Mechanical testing of connectors and assemblies used in steel scaffolding.
Materials: Metals

ID: 00027
Compression and bending of blocks, bricks, panels, tiles and stone products.
Materials: Concrete, Ceramics, Rock

ID: 00028
Compression and bending of blocks, bricks, panels, tiles and stone products.
Materials: Concrete, Ceramics, Rock

ID: 00029
Tension, compression and bending with a chamber from −40 to +150 °C.
Materials: Metals

ID: 00030
Tension, compression and bending with a chamber from −40 to +150 °C.
Materials: Metals

ID: 00031
Load-bearing capacity and residual deformation of manhole covers.
Materials: Metals, Plastics, Concrete

ID: 00032
Static testing of anchorage assemblies for prestressed structures.
Materials: Metals

ID: 00033
Static testing of anchorage assemblies for prestressed structures.
Materials: Metals

ID: 00034
Stress relaxation testing of steel wire, strand and bars.
Materials: Metals

ID: 00035
For consolidation testing of soil specimens under stepped loading.
Materials: Soil

ID: 00036
For consolidation testing of soil specimens under stepped loading.
Materials: Soil

ID: 00037
For soil consolidation tests with automatic loading and data acquisition.
Materials: Soil

ID: 00038
For automated soil consolidation testing at multiple test positions.
Materials: Soil

ID: 00039
For soil consolidation testing with axial load and pore-water pressure monitoring.
Materials: Soil

ID: 00040
For measuring pore-water pressure during soil testing.
Materials: Soil

ID: 00041
For soil consolidation testing, including field use.
Materials: Soil

ID: 00042
For investigating the compression of waste-containing soils under vertical loading.
Materials: Soil

ID: 00043
For consolidation testing of unsaturated soils with air-pressure control.
Materials: Soil

ID: 00044
For direct shear testing of unsaturated soils at a controlled displacement rate.
Materials: Soil

ID: 00045
For determining soil shear resistance under vertical and horizontal loading.
Materials: Soil

ID: 00046
For determining the direct shear resistance of soil specimens.
Materials: Soil

ID: 00047
For determining the direct shear resistance of soil specimens.
Materials: Soil

ID: 00048
For determining the direct shear resistance of soil specimens.
Materials: Soil

ID: 00049
For shear testing of four soil specimens under different vertical pressures.
Materials: Soil

ID: 00050
For direct shear testing of soil with load and horizontal displacement measurement.
Materials: Soil

ID: 00051
For shear testing of four soil specimens under different vertical pressures.
Materials: Soil

ID: 00052
For shear testing of four soil specimens under different vertical pressures.
Materials: Soil

ID: 00053
For direct shear testing of material under vertical and horizontal loading.
Materials: Soil

ID: 00054
For loading a specimen vertically and transversely while monitoring displacement.
Materials: Soil

ID: 00055
For testing interface shear resistance under a specified vertical pressure.
Materials: Soil

ID: 00056
For determining the shear resistance of rock and other materials.
Materials: Not assigned

ID: 00057
For ring shear testing of soil specimens.
Materials: Soil

ID: 00058
For loading a specimen vertically and transversely while monitoring displacement.
Materials: Soil

ID: 00059
For direct shear testing of soil while heating or cooling the specimen.
Materials: Soil

ID: 00060
For preloading soil specimens before direct shear testing.
Materials: Soil

ID: 00061
For preloading soil specimens with pneumatic pressure control.
Materials: Soil

ID: 00062
For determining the shear resistance of coarse-grained soil under axial loading and confining pressure.
Materials: Soil

ID: 00063
For determining soil strength under triaxial loading.
Materials: Soil

ID: 00064
For determining soil strength and deformation characteristics under triaxial loading.
Materials: Soil

ID: 00065
For determining soil strength and deformation characteristics under triaxial loading.
Materials: Soil

ID: 00066
For triaxial soil testing with axial loading and pressure control.
Materials: Soil

ID: 00067
For testing rock under axial loading and confining pressure.
Materials: Not assigned

ID: 00068
For mechanical specimen testing using the appropriate test accessories.
Materials: Soil

ID: 00069
For triaxial, shear and permeability testing with load or displacement control.
Materials: Soil

ID: 00070
For permeability testing of soil specimens.
Materials: Soil

ID: 00071
For permeability testing of soil specimens.
Materials: Soil

ID: 00072
For use with the ST55-2 permeameter.
Materials: Soil

ID: 00073
For determining the permeability coefficient of sandy and non-cohesive soils under constant head.
Materials: Soil

ID: 00074
For testing geosynthetic materials for vertical water permeability.
Materials: Not assigned

ID: 00075
For determining the liquid limit of soil by the cup method.
Materials: Soil

ID: 00076
For determining the moisture content below which drying causes no further soil shrinkage.
Materials: Soil

ID: 00077
For determining soil moisture content at the boundary between plastic and semi-solid states.
Materials: Soil

ID: 00078
For determining soil linear shrinkage from the change in specimen length during drying.
Materials: Soil

ID: 00079
For determining soil liquid and plastic limits using cone penetration.
Materials: Soil

ID: 00080
For determining soil liquid and plastic limits using cone penetration.
Materials: Soil

ID: 00081
For determining soil liquid and plastic limits using cone penetration.
Materials: Soil

ID: 00082
For determining the unconfined compressive strength of cohesive and semi-cohesive soils.
Materials: Soil

ID: 00083
For determining specimen moisture content by weighing and drying.
Materials: Soil

ID: 00084
For rapid determination of sand water content without external power.
Materials: Soil

ID: 00085
For determining specimen moisture content by weighing and drying.
Materials: Soil

ID: 00086
For determining moisture content from specimen mass loss during drying.
Materials: Soil

ID: 00087
For compression testing of frozen soil with displacement measurement.
Materials: Soil

ID: 00088
For mechanical loading of soil to investigate its strength characteristics.
Materials: Soil

ID: 00089
For pavement material strength, CBR and rebound modulus testing.
Materials: Soil

ID: 00090
For pavement material strength, CBR and rebound modulus testing.
Materials: Soil

ID: 00091
For pavement material strength, CBR and rebound modulus testing.
Materials: Soil

ID: 00092
For mechanical testing of pavement materials, including uniaxial compression, bending and CBR.
Materials: Soil

ID: 00093
For mixing cement-stabilised soil during test specimen preparation.
Materials: Soil

ID: 00094
For determining the California bearing ratio of soils and pavement materials.
Materials: Soil

ID: 00095
For determining the California bearing ratio of soils and pavement materials.
Materials: Soil

ID: 00096
For preparing and conducting CBR tests with specimen swell measurement.
Materials: Soil

ID: 00097
For use in CBR testing.
Materials: Soil

ID: 00098
For impact compaction of soil specimens in a cylindrical mould.
Materials: Soil

ID: 00099
For impact compaction of soil specimens in a cylindrical mould.
Materials: Soil

ID: 00100
For impact compaction of soil specimens in a cylindrical mould.
Materials: Soil

ID: 00101
For impact compaction of soil specimens in a cylindrical mould.
Materials: Soil

ID: 00102
For automatic layer-by-layer compaction of soil specimens in a mould.
Materials: Soil

ID: 00103
For automatic layer-by-layer compaction of soil specimens in a mould.
Materials: Soil

ID: 00104
For automatic impact compaction of soil specimens in a mould.
Materials: Soil

ID: 00105
For light and heavy impact compaction of specimens in a large mould.
Materials: Soil

ID: 00106
For impact compaction of soil specimens using light or heavy compaction settings.
Materials: Soil

ID: 00107
For compacting Proctor and CBR soil specimens and asphalt specimens.
Materials: Soil

ID: 00108
For removing cylindrical specimens from test moulds.
Materials: Soil

ID: 00109
For removing cylindrical specimens from test moulds.
Materials: Soil

ID: 00110
For impact testing of a specimen in a cylindrical chamber.
Materials: Not assigned

ID: 00111
For removing cylindrical specimens from moulds using axial force.
Materials: Soil

ID: 00112
For removing cylindrical specimens from moulds using axial force.
Materials: Soil

ID: 00113
For removing specimens from test moulds.
Materials: Soil

ID: 00114
For removing cylindrical specimens from moulds using axial force.
Materials: Soil

ID: 00115
For removing specimens from test moulds.
Materials: Soil

ID: 00116
For extruding soil specimens from thin-walled or sand samplers.
Materials: Soil

ID: 00117
For extruding soil specimens from thin-walled or sand samplers.
Materials: Soil

ID: 00118
Forms specimens and extrudes them from molds for laboratory testing.
Materials: Soil

ID: 00119
Compacts soil by surface vibration.
Materials: Soil

ID: 00120
Determines maximum dry density of coarse-grained soil using a vibrating table.
Materials: Soil

ID: 00121
Forms semi-rigid pavement base specimens by vibration compaction.
Materials: Soil

ID: 00122
Forms semi-rigid pavement base specimens by vibration compaction.
Materials: Soil

ID: 00123
Supports load testing to determine resilient modulus.
Materials: Soil

ID: 00124
Dries soil samples in a chamber with circulating hot air.
Materials: Soil

ID: 00125
Dries soil samples under controlled temperature with forced air.
Materials: Soil

ID: 00126
Dries soil samples under controlled temperature with forced air.
Materials: Soil

ID: 00127
Dries soil samples under controlled temperature with forced air.
Materials: Soil

ID: 00128
Dries soil samples under controlled temperature with forced air.
Materials: Soil

ID: 00129
Dries soil samples at a controlled temperature.
Materials: Soil

ID: 00130
Dries soil samples at a controlled temperature.
Materials: Soil

ID: 00131
Dries soil samples at a controlled temperature.
Materials: Soil

ID: 00132
Dries soil samples at a controlled temperature.
Materials: Soil

ID: 00133
Dries soil samples in a heated vacuum chamber.
Materials: Soil

ID: 00134
Assesses capillary water rise in soil and the risk of subgrade wetting.
Materials: Soil

ID: 00135
Determines minimum void ratio of cohesionless soil for relative density calculations.
Materials: Soil

ID: 00136
Tests relative density of cohesionless soil with an electrically driven hammer.
Materials: Soil

ID: 00137
Measures free swelling of soil.
Materials: Soil

ID: 00138
Grinds soil for laboratory sample preparation.
Materials: Soil

ID: 00139
Pulverizes soil samples before laboratory testing.
Materials: Soil

ID: 00140
Analyses soil aggregates by shaking sieve sets.
Materials: Soil

ID: 00141
Heats soil samples and laboratory vessels during sample preparation.
Materials: Soil

ID: 00142
Provides sand-bath heating during soil sample preparation.
Materials: Soil

ID: 00143
Supports density testing of coarse soil particles.
Materials: Soil

ID: 00144
Determines particle-size distribution of fine soil by hydrometer analysis.
Materials: Soil

ID: 00145
Removes air by vacuum during sample preparation.
Materials: Soil

ID: 00146
Determines soil particle density by buoyancy weighing.
Materials: Soil

ID: 00147
Investigates swelling of natural and compacted soil during immersion.
Materials: Soil

ID: 00148
Assesses soil adhesion when investigating interaction with earthmoving equipment.
Materials: Soil

ID: 00149
Punches circular filters from filter paper.
Materials: Soil

ID: 00150
Tests soil shrinkage.
Materials: Soil

ID: 00151
Applies falling-ball impact loading to specimens.
Materials: Soil

ID: 00152
Collects soil samples.
Materials: Soil

ID: 00153
Determines the angle of repose of cohesionless soil.
Materials: Soil

ID: 00154
Measures soil suspension density during hydrometer analysis.
Materials: Soil

ID: 00155
Rapidly determines natural soil moisture and density.
Materials: Soil

ID: 00156
Measures clay soil disintegration rate in water.
Materials: Soil

ID: 00157
Assesses soil penetration resistance.
Materials: Soil

ID: 00158
Saturates soil specimens held in cutting rings before testing.
Materials: Soil

ID: 00159
Saturates soil specimens held in cutting rings before testing.
Materials: Soil

ID: 00160
Sieve soil during sample preparation and analysis.
Materials: Soil

ID: 00161
Sieve soil during sample preparation and analysis.
Materials: Soil

ID: 00162
Sieve soil during sample preparation and analysis.
Materials: Soil

ID: 00163
Separates soil into particle-size fractions.
Materials: Soil

ID: 00164
Separate soil material by particle size.
Materials: Soil

ID: 00165
Cut, trim, and transfer material during specimen preparation.
Materials: Soil

ID: 00166
Collects and transfers loose soil samples.
Materials: Soil

ID: 00167
Collects and transfers loose soil samples.
Materials: Soil

ID: 00168
Measures force in mechanical testing.
Materials: Soil

ID: 00169
Holds soil samples in the laboratory.
Materials: Soil

ID: 00170
Cuts and trims soil specimens.
Materials: Soil

ID: 00171
Holds samples during soil sampling.
Materials: Soil

ID: 00172
Holds soil samples during preparation.
Materials: Soil

ID: 00173
Determines soil particle density by the pycnometer method.
Materials: Soil

ID: 00174
Holds dried soil samples during cooling and storage in an enclosed space.
Materials: Soil

ID: 00175
Supports manual grinding of soil samples.
Materials: Soil

ID: 00176
Holds small soil samples.
Materials: Soil

ID: 00177
Cuts and holds soil specimens for sample preparation.
Materials: Soil

ID: 00178
Measures linear displacement during laboratory testing.
Materials: Soil

ID: 00179
Helps prepare a soil specimen in a cutting ring.
Materials: Soil

ID: 00180
Compacts soil specimens during test preparation.
Materials: Soil

ID: 00181
Weigh soil samples and support density investigations.
Materials: Soil

ID: 00182
Grinds laboratory samples to a specified fineness.
Materials: Soil

ID: 00183
Determines unconfined compressive strength of cohesive and semi-cohesive soil.
Materials: Soil

ID: 00184
Performs mechanical tests on pavement materials, including CBR and unconfined compression.
Materials: Soil

ID: 00185
Performs mechanical tests on pavement materials, including CBR and unconfined compression.
Materials: Soil

ID: 00186
Investigates soil compression under stepped pressure loading.
Materials: Soil

ID: 00187
Tests coarse-grained soil under triaxial loading with pressure and deformation monitoring.
Materials: Soil

ID: 00188
Determines coarse-grained soil compressibility from pressure-deformation behaviour.
Materials: Soil

ID: 00189
Dries soil samples at a controlled temperature.
Materials: Soil

ID: 00190
Dries soil samples at a controlled temperature.
Materials: Soil

ID: 00191
Dries soil samples at a controlled temperature.
Materials: Soil

ID: 00192
Dries soil samples at a controlled temperature.
Materials: Soil

ID: 00193
Dries soil samples at a controlled temperature.
Materials: Soil

ID: 00194
Dries soil samples at a controlled temperature.
Materials: Soil

ID: 00195
Dries soil samples at a controlled temperature.
Materials: Soil

ID: 00196
Dries soil samples at a controlled temperature.
Materials: Soil

ID: 00197
Determines particle-size distribution of fine soil by hydrometer analysis.
Materials: Soil

ID: 00198
Determines CBR bearing capacity of soil and base materials.
Materials: Soil

ID: 00199
Determines direct shear strength of soil specimens.
Materials: Soil

ID: 00200
Investigates dynamic soil properties through triaxial testing.
Materials: Soil

ID: 00201
Heats soil samples and laboratory vessels during test preparation.
Materials: Soil

ID: 00202
Determines direct shear strength of soil specimens.
Materials: Soil

ID: 00203
Provides heating during soil sample preparation.
Materials: Soil

ID: 00204
Investigates soil specimen compression under vertical pressure.
Materials: Soil

ID: 00205
Compacts soil specimens in laboratory molds using a falling hammer.
Materials: Soil

ID: 00206
Determines direct shear strength of soil specimens.
Materials: Soil

ID: 00207
Determines CBR bearing capacity of soil and base materials.
Materials: Soil

ID: 00208
Determines soil liquid limit using a dropping cup.
Materials: Soil

ID: 00209
Determines soil particle density by the pycnometer method.
Materials: Soil

ID: 00210
Measures soil resistivity and earth-system parameters.
Materials: Soil

ID: 00211
In-situ vane shear testing of saturated soft clay.
Materials: Soil

ID: 00212
Lightweight dynamic probing for construction site investigations.
Materials: Soil

ID: 00213
Lightweight dynamic penetrometer with a 10 kg hammer.
Materials: Soil

ID: 00214
Heavy-duty penetration test apparatus with a 63.5 kg hammer.
Materials: Soil

ID: 00215
Dynamic cone probing of existing pavement layers.
Materials: Soil

ID: 00216
Plate load assessment of soil foundation bearing capacity.
Materials: Soil

ID: 00217
Plate load assessment of compacted soil foundations.
Materials: Soil

ID: 00218
Loading and displacement measurement assembly with an 800 mm plate.
Materials: Soil

ID: 00219
Static penetration testing with optional vane shear use.
Materials: Soil

ID: 00220
Mobile CPT unit with anchorage and penetration systems.
Materials: Soil

ID: 00221
Tracked static penetration unit rated at 150 kN penetration force.
Materials: Soil

ID: 00222
In-situ CBR test apparatus, model BT STCBR-4.
Materials: Soil

ID: 00223
In-situ CBR test apparatus, model BT STCBR-2.
Materials: Soil

ID: 00224
Field resilient modulus testing assembly.
Materials: Soil

ID: 00225
Plate testing of roadbed soil and pavement layer resilient modulus.
Materials: Soil

ID: 00226
Plate testing of roadbed soil and pavement layer resilient modulus.
Materials: Soil

ID: 00227
Reaction frame for moulding unconfined test specimens.
Materials: Soil

ID: 00228
Sand replacement density test set with a 150 mm diameter.
Materials: Soil

ID: 00229
Sand replacement density test set in listed 100, 150 and 200 mm sizes.
Materials: Soil

ID: 00230
Balloon density apparatus with a 3000 ml capacity.
Materials: Soil

ID: 00231
In-situ soil density measurement by sand replacement.
Materials: Soil

ID: 00232
Digital soil hardness testing.
Materials: Soil

ID: 00233
Light drop weight testing of soil and rock in road construction.
Materials: Soil

ID: 00234
Hand soil augers and samplers in a carrying case.
Materials: Soil

ID: 00235
Soil penetrometer with a drop hammer.
Materials: Soil

ID: 00236
Hand auger for soil sampling and boring to a stated depth of 1–5 m.
Materials: Soil

ID: 00237
In-situ soil sampler, model BT STYZ-1.
Materials: Soil

ID: 00238
Stainless steel soil sampler with an extruding block.
Materials: Soil

ID: 00239
In-situ soil sampler with a 44 mm sampling diameter.
Materials: Soil

ID: 00240
Extractor for removing soil augers.
Materials: Soil

ID: 00241
Drilling machine with a stated drilling depth of 100 m.
Materials: Soil

ID: 00242
Crawler drilling machine with casing and DTH drilling parameters.
Materials: Soil

ID: 00243
Drilling machine with a stated depth of 15–20 m.
Materials: Soil

ID: 00244
Drilling machine with a stated maximum depth of 10 m.
Materials: Soil

ID: 00245
Three-instrument set for slurry property checks.
Materials: Soil

ID: 00246
Non-nuclear density and moisture measurement of compacted soil.
Materials: Soil

ID: 00247
Four-bladed vane shear apparatus, model BT STZSZ-2.
Materials: Soil

ID: 00248
For particle-size analysis of granular samples by sieving.
Materials: Aggregates

ID: 00249
For separating aggregate samples by particle size using a stack of laboratory sieves.
Materials: Aggregates

ID: 00250
For sieve analysis of non-cohesive granular materials.
Materials: Aggregates

ID: 00251
For sieve analysis of granular samples using vertical vibration.
Materials: Aggregates

ID: 00252
For separating a granular sample into fractions using test sieves.
Materials: Aggregates

ID: 00253
For determining the particle-size distribution of dry, non-cohesive samples by sieving.
Materials: Aggregates

ID: 00254
For sieve analysis of non-cohesive granular materials with a noise-reducing enclosure.
Materials: Aggregates

ID: 00255
For sieving non-cohesive granular materials with reduced laboratory noise.
Materials: Aggregates

ID: 00256
For containing and loading an aggregate specimen in the crushing value test.
Materials: Aggregates

ID: 00257
For assessing flaky and elongated aggregate particles.
Materials: Aggregates

ID: 00258
For determining fine aggregate angularity using a free-flowing sample.
Materials: Aggregates

ID: 00259
For assessing fine aggregate flow through a funnel.
Materials: Aggregates

ID: 00260
For reducing coarse aggregate laboratory samples before testing.
Materials: Aggregates

ID: 00261
For splitting a fine aggregate sample during laboratory preparation.
Materials: Aggregates

ID: 00262
For reducing granular aggregate laboratory samples.
Materials: Aggregates

ID: 00263
For assessing aggregate resistance to fragmentation and abrasion in a drum with steel balls.
Materials: Aggregates

ID: 00264
For assessing coarse aggregate resistance to degradation and abrasion in a drum with steel balls.
Materials: Aggregates

ID: 00265
For testing aggregate in a steel-ball drum with reduced laboratory noise.
Materials: Aggregates

ID: 00266
For abrasion testing of aggregates in a rotating cylinder with steel balls.
Materials: Aggregates

ID: 00267
For assessing aggregate abrasion resistance in rotating steel cylinders.
Materials: Aggregates

ID: 00268
For determining aggregate surface resistance to abrasion by the AAV method.
Materials: Aggregates

ID: 00269
For mechanical sample shaking during sand equivalent testing.
Materials: Aggregates

ID: 00270
For mechanical shaking of test cylinders in the sand equivalent test.
Materials: Aggregates

ID: 00271
For manual sand equivalent testing of fine aggregate.
Materials: Aggregates

ID: 00272
For evaluating coarse aggregate resistance to repeated impact.
Materials: Aggregates

ID: 00273
For accelerated polishing of stone aggregate when assessing resistance to polishing.
Materials: Aggregates

ID: 00274
For specimen stirring during determination of the methylene blue value of fine aggregate.
Materials: Aggregates

ID: 00275
For determining the methylene blue value, MBV, of fine aggregate.
Materials: Aggregates

ID: 00276
For evaluating soft particles in crushed rock and gravel.
Materials: Aggregates

ID: 00277
For determining soft particle content in gravel and crushed aggregate.
Materials: Aggregates

ID: 00278
For filling a measuring container in bulk density and void content tests of granular material.
Materials: Aggregates

ID: 00279
For guiding coarse aggregate during laboratory transfer.
Materials: Aggregates

ID: 00280
For measuring specimen volume when determining aggregate bulk density.
Materials: Aggregates

ID: 00281
For handling an aggregate sample during bulk density determination.
Materials: Aggregates

ID: 00282
For measuring mortar specimen length changes during shrinkage and expansion.
Materials: Not assigned

ID: 00283
For determining the saturated surface-dry condition of fine aggregate.
Materials: Aggregates

ID: 00284
For determining the void content of dry compacted filler.
Materials: Aggregates

ID: 00285
For reducing granular material in laboratory samples.
Materials: Aggregates

ID: 00286
For crushing laboratory rock and aggregate samples before testing.
Materials: Aggregates

ID: 00287
For determining the particle-size distribution of sand and coarse aggregate.
Materials: Aggregates

ID: 00288
For determining the particle-size distribution of asphalt mixture aggregates.
Materials: Aggregates

ID: 00289
For holding an aggregate sample during density determination by submerged weighing.
Materials: Aggregates

ID: 00290
For controlled heating and specimen lifting operations in aggregate durability testing.
Materials: Aggregates

ID: 00291
For sieve analysis of non-cohesive granular samples.
Materials: Aggregates

ID: 00292
For assessing coarse aggregate resistance to degradation and abrasion in a drum with steel balls.
Materials: Aggregates

ID: 00293
For crushing rock material samples before laboratory testing.
Materials: Aggregates

ID: 00294
For crushing laboratory rock and aggregate samples.
Materials: Aggregates

ID: 00295
For aggregate soundness testing with temperature control and basket lifting.
Materials: Aggregates

ID: 00296
For determining the softening point of bituminous binders.
Materials: Bitumen

ID: 00297
For determining the softening point of bituminous binders.
Materials: Bitumen

ID: 00298
For determination of the softening point of bitumen.
Materials: Bitumen

ID: 00299
For automated determination of bitumen softening point.
Materials: Bitumen

ID: 00300
For measuring the penetration depth of a standard needle into bitumen.
Materials: Bitumen

ID: 00301
For measuring needle penetration into bitumen.
Materials: Bitumen

ID: 00302
For measuring penetration of a standard needle into bitumen.
Materials: Bitumen

ID: 00303
For bitumen penetration testing with specimen temperature conditioning.
Materials: Bitumen

ID: 00304
For determining bitumen ductility and elastic recovery.
Materials: Bitumen

ID: 00305
For extending bitumen specimens while measuring tensile force.
Materials: Bitumen

ID: 00306
For extracting binder from asphalt mixtures.
Materials: Asphalt mixtures

ID: 00307
For solvent extraction of bituminous binder from asphalt mixtures.
Materials: Asphalt mixtures

ID: 00308
For determining bituminous binder content in asphalt mixtures.
Materials: Asphalt mixtures

ID: 00309
For automated extraction of bituminous binder from mixtures.
Materials: Asphalt mixtures

ID: 00310
For extracting bitumen from asphalt mixtures by reflux extraction.
Materials: Asphalt mixtures

ID: 00311
For recovering solvent from a bitumen solution.
Materials: Asphalt mixtures, Bitumen

ID: 00312
For centrifugal separation of laboratory samples.
Materials: Not assigned

ID: 00313
For determining paraffin content in bitumen.
Materials: Bitumen

ID: 00314
For laboratory mixing and dispersion when preparing modified bitumen and emulsions.
Materials: Bitumen

ID: 00315
For determining the electrical charge polarity of bitumen-emulsion particles.
Materials: Bitumen

ID: 00316
For checking bitumen-emulsion storage stability.
Materials: Bitumen

ID: 00317
For assessing material loss during wet abrasion of emulsified asphalt slurry mixtures.
Materials: Asphalt mixtures

ID: 00318
For assessing bitumen-emulsion adhesion under reciprocating movement.
Materials: Bitumen

ID: 00319
For determining the Fraass breaking point of bitumen.
Materials: Bitumen

ID: 00320
For laboratory work involving glassware and heating.
Materials: Not assigned

ID: 00321
For laboratory evaporation of liquid from a rotating flask.
Materials: Not assigned

ID: 00322
For testing the breaking rate of bitumen emulsions.
Materials: Bitumen

ID: 00323
For assessing slurry consistency by spread on a graduated plate.
Materials: Asphalt mixtures

ID: 00324
For assessing excess binder in slurry-seal mixtures.
Materials: Asphalt mixtures

ID: 00325
For assessing bitumen-emulsion adhesion to mineral material.
Materials: Bitumen

ID: 00326
For cleaning accessories used in bitumen testing.
Materials: Bitumen

ID: 00327
For collecting bituminous-binder samples.
Materials: Bitumen

ID: 00328
For determining the efflux viscosity of liquid petroleum products.
Materials: Bitumen

ID: 00329
For determining the efflux viscosity of petroleum products and other compatible liquids.
Materials: Bitumen

ID: 00330
For determining bituminous-material viscosity by flow through an orifice.
Materials: Bitumen

ID: 00331
For viscosity measurement of heated liquid specimens.
Materials: Bitumen

ID: 00332
For determining kinematic viscosity using glass capillaries.
Materials: Bitumen

ID: 00333
For measuring bitumen dynamic viscosity by the vacuum capillary method.
Materials: Bitumen

ID: 00334
For viscosity determination from the efflux time of a heated specimen.
Materials: Bitumen

ID: 00335
For determining bitumen flash and fire points.
Materials: Bitumen

ID: 00336
For determining flash and fire points of bituminous materials.
Materials: Bitumen

ID: 00337
For maintaining a controlled temperature during laboratory tests.
Materials: Not assigned

ID: 00338
For temperature conditioning of laboratory specimens and an external circulation circuit.
Materials: Not assigned

ID: 00339
For conditioning bitumen and asphalt-mixture specimens at a set temperature.
Materials: Bitumen, Asphalt mixtures

ID: 00340
For temperature conditioning of bitumen and asphalt-mixture specimens.
Materials: Bitumen, Asphalt mixtures

ID: 00341
For temperature conditioning of bitumen and other compatible specimens.
Materials: Bitumen

ID: 00342
For determining the maximum theoretical density of asphalt mixtures.
Materials: Asphalt mixtures

ID: 00343
For determining the maximum theoretical density of asphalt mixtures.
Materials: Asphalt mixtures

ID: 00344
For determining maximum theoretical density of asphalt mixture by the vacuum method.
Materials: Asphalt mixtures

ID: 00345
For assessing bitumen changes after thin-film heating.
Materials: Bitumen

ID: 00346
For assessing bitumen changes after heating a thin film.
Materials: Bitumen

ID: 00347
For heat aging of a bitumen film and assessment of mass change.
Materials: Bitumen

ID: 00348
For preparing heated laboratory asphalt mixtures.
Materials: Asphalt mixtures

ID: 00349
For preparing laboratory batches of asphalt mixtures.
Materials: Asphalt mixtures

ID: 00350
For preparing heated laboratory asphalt mixtures.
Materials: Asphalt mixtures

ID: 00351
For impact compaction of Marshall asphalt specimens.
Materials: Asphalt mixtures

ID: 00352
For preparing standard cylindrical asphalt-mixture specimens.
Materials: Asphalt mixtures

ID: 00353
For impact compaction of laboratory asphalt specimens.
Materials: Asphalt mixtures

ID: 00354
For impact compaction of laboratory asphalt specimens.
Materials: Asphalt mixtures

ID: 00355
For manual impact compaction of asphalt specimens.
Materials: Asphalt mixtures

ID: 00356
For manual compaction of cylindrical asphalt-mixture specimens.
Materials: Asphalt mixtures

ID: 00357
For tensile testing of bitumen specimens with force and travel control.
Materials: Bitumen

ID: 00358
For determining Marshall stability and flow of asphalt specimens.
Materials: Asphalt mixtures

ID: 00359
For determining Marshall stability and flow of asphalt-mixture specimens.
Materials: Asphalt mixtures

ID: 00360
For determining asphalt mixture binder content by ignition.
Materials: Asphalt mixtures

ID: 00361
For compacting asphalt specimens under pressure with gyratory mould movement.
Materials: Asphalt mixtures

ID: 00362
For cutting and preparing asphalt-mixture specimens.
Materials: Asphalt mixtures

ID: 00363
For accelerated aging of bituminous binder under elevated temperature and pressure.
Materials: Bitumen

ID: 00364
For direct-tension testing of bituminous binders.
Materials: Bitumen

ID: 00365
For preparing asphalt slabs for wheel-tracking tests.
Materials: Asphalt mixtures

ID: 00366
For producing asphalt slabs for wheel-tracking tests.
Materials: Asphalt mixtures

ID: 00367
For assessing the rutting resistance of asphalt mixtures.
Materials: Asphalt mixtures

ID: 00368
For assessing the rutting resistance of asphalt mixtures.
Materials: Asphalt mixtures

ID: 00369
For evaluating asphalt mixture resistance to rutting at elevated temperature.
Materials: Asphalt mixtures

ID: 00370
For investigating material rheology under rotation and oscillation.
Materials: Bitumen

ID: 00371
For determining water permeability of asphalt specimens.
Materials: Asphalt mixtures

ID: 00372
For laboratory processing of specimens by rotating bottles.
Materials: Not assigned

ID: 00373
For pressure filtration of liquid laboratory samples.
Materials: Not assigned

ID: 00374
For optical measurement of fibre dimensions.
Materials: Not assigned

ID: 00375
For removing organic and bituminous residues from laboratory accessories by heating.
Materials: Bitumen, Asphalt mixtures

ID: 00376
For laboratory assessment of oil absorption by fibre additives.
Materials: Not assigned

ID: 00377
For measuring the height of cylindrical Marshall specimens.
Materials: Asphalt mixtures

ID: 00378
For positioning an asphalt specimen during a splitting test.
Materials: Asphalt mixtures

ID: 00379
For positioning an asphalt specimen during bending tests.
Materials: Asphalt mixtures

ID: 00380
For loading an asphalt specimen in uniaxial compression.
Materials: Asphalt mixtures

ID: 00381
For pycnometric determination of bituminous material density.
Materials: Bitumen

ID: 00382
For preparing laboratory asphalt mixtures.
Materials: Asphalt mixtures

ID: 00383
For determining Marshall stability and flow of asphalt-mixture specimens.
Materials: Asphalt mixtures

ID: 00384
For determining Marshall stability and flow of asphalt specimens.
Materials: Asphalt mixtures

ID: 00385
For measuring Marshall stability and flow of asphalt specimens.
Materials: Asphalt mixtures

ID: 00386
For determining Marshall stability and flow of asphalt-mixture specimens.
Materials: Asphalt mixtures

ID: 00387
For determining bitumen ductility and elastic recovery.
Materials: Bitumen

ID: 00388
For testing samples in rotating bottles.
Materials: Not assigned

ID: 00389
For grinding and preparing dry laboratory specimens.
Materials: Not assigned

ID: 00390
For laboratory mixing, dispersion and grinding.
Materials: Not assigned

ID: 00391
For determining the extractable fraction of laboratory samples.
Materials: Not assigned

ID: 00392
For determining solvent-extractable components of laboratory specimens.
Materials: Not assigned

ID: 00393
For determining bitumen solubility using solution filtration.
Materials: Bitumen

ID: 00394
For compacting asphalt specimens under pressure with gyratory mould movement.
Materials: Asphalt mixtures

ID: 00395
For assessing the rutting resistance of asphalt mixtures.
Materials: Asphalt mixtures

ID: 00396
For evaluating asphalt mixture resistance to rutting at elevated temperature.
Materials: Asphalt mixtures

ID: 00397
For conditioning bitumen and asphalt-mixture specimens at a set temperature.
Materials: Bitumen, Asphalt mixtures

ID: 00398
For determining the maximum theoretical density of asphalt mixtures.
Materials: Asphalt mixtures

ID: 00399
For investigating material rheology under rotation and oscillation.
Materials: Not assigned

ID: 00400
For assessing asphalt rutting resistance under a rolling-wheel load.
Materials: Asphalt mixtures

ID: 00401
For laboratory pressure ageing of bituminous binder.
Materials: Bitumen

ID: 00402
For investigating creep of a bitumen beam under bending.
Materials: Bitumen

ID: 00403
For investigating asphalt fatigue behaviour under repeated bending.
Materials: Asphalt mixtures

ID: 00404
For preparing large Marshall asphalt-mixture specimens.
Materials: Asphalt mixtures

ID: 00405
For impact compaction of larger-diameter asphalt specimens.
Materials: Asphalt mixtures

ID: 00406
For preparing laboratory asphalt mixtures in a heated pan.
Materials: Asphalt mixtures

ID: 00407
For solvent extraction of bituminous binder from asphalt mixtures.
Materials: Asphalt mixtures

ID: 00408
For determining the softening point of bituminous binder.
Materials: Bitumen

ID: 00409
For determining bitumen-emulsion breaking rate during mixing.
Materials: Bitumen

ID: 00410
For determining bitumen-emulsion breaking rate during mixing.
Materials: Bitumen

ID: 00411
For determining the fraction content of liquid petroleum bitumen by distillation.
Materials: Bitumen

ID: 00412
Compacts concrete in moulds during laboratory specimen preparation.
Materials: Concrete

ID: 00413
Compacts concrete in moulds during laboratory specimen preparation.
Materials: Concrete

ID: 00414
Compacts concrete in moulds during laboratory specimen preparation.
Materials: Concrete

ID: 00415
Compacts concrete in moulds during laboratory specimen preparation.
Materials: Concrete

ID: 00416
Compacts concrete specimens on a table with magnetic mould retention.
Materials: Concrete

ID: 00417
Compacts concrete specimens on a table with magnetic mould retention.
Materials: Concrete

ID: 00418
Prepares laboratory batches of concrete.
Materials: Concrete

ID: 00419
Prepares laboratory batches of concrete.
Materials: Concrete

ID: 00420
Mixes concrete in a laboratory bowl using twin horizontal shafts.
Materials: Concrete

ID: 00421
Prepares concrete for laboratory testing.
Materials: Concrete

ID: 00422
Determines concrete setting time from penetration resistance of its mortar fraction.
Materials: Concrete

ID: 00423
Determines concrete setting time from penetration resistance of its mortar fraction.
Materials: Concrete

ID: 00424
Determines concrete setting time from penetration resistance of its mortar fraction.
Materials: Concrete

ID: 00425
Tests cement and concrete specimens for abrasion resistance.

ID: 00426
Assesses specimen resistance to water penetration under pressure.
Materials: Concrete

ID: 00427
Assesses specimen resistance to water penetration under pressure.
Materials: Concrete

ID: 00428
Assesses specimen resistance to water penetration under pressure.
Materials: Concrete

ID: 00429
Assesses specimen resistance to water penetration under pressure.
Materials: Concrete

ID: 00430
Assesses specimen resistance to water penetration under pressure.
Materials: Concrete

ID: 00431
Installs and extracts specimens in moulds used for concrete water-impermeability tests.
Materials: Concrete

ID: 00432
Determines air content in fresh concrete.
Materials: Concrete

ID: 00433
Determines air content in fresh concrete.
Materials: Concrete

ID: 00434
Determines air content in fresh concrete.
Materials: Concrete

ID: 00435
Supports laboratory assessment of chloride transport through concrete.
Materials: Concrete

ID: 00436
Prepares water-saturated specimens using vacuum.
Materials: Not assigned

ID: 00437
Supports dynamic elastic modulus assessment of concrete specimens.
Materials: Concrete

ID: 00438
Measures concrete specimen deformation during static elastic-modulus testing.
Materials: Concrete

ID: 00439
Measures concrete specimen deformation for static elastic-modulus testing.
Materials: Concrete

ID: 00440
Measures concrete specimen deformation for static elastic-modulus testing.
Materials: Concrete

ID: 00441
Assesses concrete consistency by the time required for remoulding under vibration.
Materials: Concrete

ID: 00442
Measures concrete specimen length changes for shrinkage and expansion studies.
Materials: Concrete

ID: 00443
Measures concrete specimen length changes for shrinkage and expansion studies.
Materials: Concrete

ID: 00444
Assesses segregation of self-compacting concrete.
Materials: Concrete

ID: 00445
Assesses self-compacting concrete passing through a bar obstacle.
Materials: Concrete

ID: 00446
Mechanical treatment of a laboratory sample by jolting the table.
Materials: Not assigned

ID: 00447
Determines self-compacting concrete passing ability.
Materials: Concrete

ID: 00448
Determines the flow time of self-compacting concrete.
Materials: Concrete

ID: 00449
Assesses filling of a test box by self-compacting concrete under its own weight.
Materials: Concrete

ID: 00450
Assesses fresh concrete consistency by cone slump.
Materials: Concrete

ID: 00451
Assesses fresh concrete consistency by cone slump.
Materials: Concrete

ID: 00452
Assesses fresh concrete consistency by cone slump.
Materials: Concrete

ID: 00453
Assesses fresh concrete consistency by cone slump.
Materials: Concrete

ID: 00454
Assesses fresh concrete consistency by cone slump.
Materials: Concrete

ID: 00455
Assesses fresh concrete consistency by cone slump.
Materials: Concrete

ID: 00456
Measures height for concrete slump assessment.
Materials: Concrete

ID: 00457
Assesses concrete workability by the compacting factor method.
Materials: Concrete

ID: 00458
Determines chloride ion content in a prepared laboratory sample.
Materials: Concrete

ID: 00459
Assesses concrete mixture bleeding under applied pressure.
Materials: Concrete

ID: 00460
Base plate for self-compacting concrete flow-spread assessment.
Materials: Concrete

ID: 00461
Base plate for self-compacting concrete flow-spread assessment.
Materials: Concrete

ID: 00462
Electrical measurement for laboratory concrete assessment.
Materials: Concrete

ID: 00463
Monitors free shrinkage deformation of concrete after moulding.
Materials: Concrete

ID: 00464
Produces cylindrical concrete specimens of the specified size.
Materials: Concrete

ID: 00465
Produces cylindrical concrete specimens of the specified size.
Materials: Concrete

ID: 00466
Produces cylindrical concrete specimens of the specified size.
Materials: Concrete

ID: 00467
Produces cylindrical concrete specimens of the specified size.
Materials: Concrete

ID: 00468
Produces cylindrical concrete specimens of the specified size.
Materials: Concrete

ID: 00469
For moulding cylindrical concrete specimens.
Materials: Concrete

ID: 00470
For moulding cylindrical concrete specimens.
Materials: Concrete

ID: 00471
For preparing concrete cube specimens.
Materials: Concrete

ID: 00472
For preparing concrete cube specimens.
Materials: Concrete

ID: 00473
For preparing concrete cube specimens.
Materials: Concrete

ID: 00474
For preparing concrete cube specimens.
Materials: Concrete

ID: 00475
For preparing concrete cube specimens.
Materials: Concrete

ID: 00476
For preparing concrete cube specimens.
Materials: Concrete

ID: 00477
For moulding cubic laboratory specimens.
Materials: Not assigned

ID: 00478
For preparing specimens for assessment of cracking.
Materials: Not assigned

ID: 00479
For preparing cement mortar cube specimens.
Materials: Cement

ID: 00480
For preparing cement mortar cube specimens.
Materials: Cement

ID: 00481
For preparing mortar bars when investigating aggregate reactivity.
Materials: Aggregates

ID: 00482
For preparing cement mortar prism specimens.
Materials: Cement

ID: 00483
For preparing concrete beams before flexural testing.
Materials: Concrete

ID: 00484
For preparing concrete beams before flexural testing.
Materials: Concrete

ID: 00485
For moulding a laboratory specimen of the specified geometry.
Materials: Concrete

ID: 00486
For moulding a laboratory specimen of the specified geometry.
Materials: Concrete

ID: 00487
For moulding a laboratory specimen of the specified geometry.
Materials: Concrete

ID: 00488
For moulding a laboratory specimen of the specified geometry.
Materials: Concrete

ID: 00489
For moulding a laboratory specimen of the specified geometry.
Materials: Cement

ID: 00490
Transfers load to a concrete specimen during flexural testing.
Materials: Concrete

ID: 00491
Establishes load transfer for a concrete splitting test.
Materials: Concrete

ID: 00492
For installation inside a compatible mould during specimen preparation.
Materials: Not assigned

ID: 00493
Accessory for preparing a concrete cylinder for compression testing.
Materials: Concrete

ID: 00494
Accessory for preparing a concrete cylinder for compression testing.
Materials: Concrete

ID: 00495
Accessory for preparing a concrete cylinder for compression testing.
Materials: Concrete

ID: 00496
Accessory for preparing a concrete cylinder for compression testing.
Materials: Concrete

ID: 00497
For vibration compaction of concrete during specimen preparation.
Materials: Concrete

ID: 00498
For moulding cylindrical concrete specimens.
Materials: Concrete

ID: 00499
For moulding cylindrical concrete specimens.
Materials: Concrete

ID: 00500
For pressure-water washing of bridge deck plates.
Materials: Not assigned

ID: 00501
For cleaning compatible laboratory fixtures and accessories.
Materials: Not assigned

ID: 00502
For preparing prismatic concrete specimens.
Materials: Concrete

ID: 00503
Tests concrete specimens under water pressure using pneumatic sealing.
Materials: Concrete

ID: 00504
Cuts rock pieces during laboratory specimen preparation.
Materials: Rock

ID: 00505
Automatic double-blade cutting of rock blanks in an enclosed machine.
Materials: Rock

ID: 00506
Automatic double-blade cutting of rock blanks in an enclosed machine.
Materials: Rock

ID: 00507
Prepares cylindrical concrete and rock specimen surfaces.

ID: 00508
Prepares cubic and cylindrical rock and concrete specimens.

ID: 00509
Extracts cylindrical cores from rock pieces for subsequent preparation and testing.
Materials: Rock

ID: 00510
Measures rock specimen swelling deformation under lateral restraint.
Materials: Rock

ID: 00511
Measures rock specimen dimensional change during free swelling.
Materials: Rock

ID: 00512
Assesses rock disintegration under water exposure and specimen rotation in a screen drum.
Materials: Rock

ID: 00513
Assesses rock disintegration under water exposure and specimen rotation in a screen drum.
Materials: Rock

ID: 00514
Measures the force developed as a restrained rock specimen swells.
Materials: Rock

ID: 00515
Obtains the measurements used to calculate the rock point load strength index.
Materials: Rock

ID: 00516
Records failure load for calculation of the rock point load strength index.
Materials: Rock

ID: 00517
Measures failure load with peak capture and storage of test results.
Materials: Rock

ID: 00518
Cuts rock pieces during laboratory specimen preparation.
Materials: Rock

ID: 00519
Cuts rock pieces during laboratory specimen preparation.
Materials: Rock

ID: 00520
Prepares cement paste for laboratory binder testing.
Materials: Cement

ID: 00521
Mixes cement paste in an enclosed working area with electric bowl lifting.
Materials: Cement

ID: 00522
Prepares cement mortar for subsequent specimen production and testing.
Materials: Cement

ID: 00523
Prepares mortar in an enclosed mixing assembly with electric bowl lifting.
Materials: Cement

ID: 00524
Compacts mortar in a mould during laboratory specimen preparation.
Materials: Cement

ID: 00525
Compacts cement mortar in a mould with touchscreen cycle control.
Materials: Cement

ID: 00526
Determines flexural strength of cement mortar and other brittle non-metallic materials.
Materials: Cement

ID: 00527
Tests cement mortar in flexure with digital load indication.
Materials: Cement

ID: 00528
Measures flexural load on cement mortar with peak-value retention.
Materials: Cement

ID: 00529
Determines cement fineness from sieve residue under negative-pressure air-jet sieving.
Materials: Cement

ID: 00530
Determines cement fineness by air-jet sieving with digital indication.
Materials: Cement

ID: 00531
Grinds and mixes material in a drum during laboratory sample preparation.
Materials: Cement

ID: 00532
Heats cement paste specimens in water during soundness assessment.
Materials: Cement

ID: 00533
Heats cement specimens in water and releases steam through the provided outlet pipe.
Materials: Cement

ID: 00534
Assesses cement mortar workability from its spread after a series of drops.
Materials: Cement

ID: 00535
Used to assess mortar workability from its spread with manual operation.
Materials: Cement

ID: 00536
Determines cement-mortar flow from its spread after a prescribed drop cycle.
Materials: Cement

ID: 00537
Forms a cement-mix specimen to a defined geometry.
Materials: Cement

ID: 00538
Evaluates cement-powder specific surface by air permeability.
Materials: Cement

ID: 00539
Automates readings in air-permeability determination of cement specific surface.
Materials: Cement

ID: 00540
Determines cement-paste consistency and setting time from penetration of the selected tool.
Materials: Cement

ID: 00541
Determines cement-paste consistency and setting time from penetration of the selected tool.
Materials: Cement

ID: 00542
Determines cement-paste setting time with an automated measurement cycle.
Materials: Cement

ID: 00543
Checks mould extensibility and supports readings of pointer separation.
Materials: Cement

ID: 00544
Evaluates cement-grout flow by discharge through a cone.
Materials: Cement

ID: 00545
Measures pH of aqueous solutions in laboratory work.
Materials: Not assigned

ID: 00546
Compares specimen length in shrinkage and expansion work.
Materials: Cement

ID: 00547
Supports sample treatment and chloride determination using heating and distillation.
Materials: Cement

ID: 00548
Supports free calcium oxide determination in cement laboratory work.
Materials: Cement

ID: 00549
Collects powdered-cement samples through the openings of a tubular probe.
Materials: Cement

ID: 00550
Collects powdered-cement samples through the openings of a tubular probe.
Materials: Cement

ID: 00551
Collects powdered-cement samples through the openings of a tubular probe.
Materials: Cement

ID: 00552
Provides specimen treatment within the stated pressure and temperature limits.
Materials: Cement

ID: 00553
Provides autoclave exposure for assessing cement-specimen volume stability.
Materials: Cement

ID: 00554
Measures specimen length change against a reference reading.
Materials: Cement

ID: 00555
Heats small specimens and items in a chamber for laboratory treatment.
Materials: Not assigned

ID: 00556
Heats small specimens and items in a chamber for laboratory treatment.
Materials: Not assigned

ID: 00557
Determines initial and final setting of cement paste using weighted needles.
Materials: Cement

ID: 00558
Produces distilled water for laboratory operations.
Materials: Not assigned

ID: 00559
Produces distilled water for laboratory operations.
Materials: Not assigned

ID: 00560
Produces distilled water for laboratory operations.
Materials: Not assigned

ID: 00561
Used to determine cement density from displaced liquid volume.
Materials: Cement
ID: 00562
For preparing solutions and establishing a defined laboratory volume.
Materials: Not assigned

ID: 00563
For preparing solutions and establishing a defined laboratory volume.
Materials: Not assigned

ID: 00564
For organised storage and identification of cement samples.
Materials: Cement

ID: 00565
For wet sieving of cement material.
Materials: Cement

ID: 00566
For liquid delivery and volume readings during laboratory preparation and analysis.
Materials: Not assigned

ID: 00567
For assessing cement soundness through the change in indicator spacing.
Materials: Cement

ID: 00568
Prepares cement paste using planetary blade motion.
Materials: Cement

ID: 00569
Prepares cement mortar for specimen moulding and subsequent testing.
Materials: Cement

ID: 00570
Compacts cement mortar in moulds through repeated jolting.
Materials: Cement

ID: 00571
For assessing cement paste through needle or plunger penetration.
Materials: Cement

ID: 00572
Provides water heating and timed exposure for cement specimens.
Materials: Cement

ID: 00573
For assessing cement soundness under elevated temperature and pressure.
Materials: Cement

ID: 00574
Investigates soil–geotextile interface friction and mechanical properties of geotextile materials.
Materials: Geosynthetics

ID: 00575
Investigates water flow through the material and drainage within its plane.
Materials: Geosynthetics

ID: 00576
Investigates water flow through geotextile normal to its plane.
Materials: Geosynthetics

ID: 00577
Investigates in-plane water drainage of geosynthetics and plastic drainage boards.
Materials: Geosynthetics

ID: 00578
Establishes adjustable water head for investigating vertical flow through geosynthetic material.
Materials: Geosynthetics

ID: 00579
Assesses filtration compatibility between a geosynthetic material and a selected soil.
Materials: Geosynthetics

ID: 00580
Investigates a geosynthetic specimen’s resistance to water passage under pressure.
Materials: Geosynthetics

ID: 00581
Investigates the water-flow capacity of plastic drainage boards.
Materials: Geosynthetics

ID: 00582
For investigating water drainage through geosynthetic drainage materials under a selected head and lateral pressure.
Materials: Geosynthetics

ID: 00583
Investigates shear resistance at a soil–geosynthetic interface under a selected normal pressure.
Materials: Geosynthetics

ID: 00584
For investigating geosynthetic friction by direct shear and pull-out from a test chamber.
Materials: Geosynthetics

ID: 00585
Determines geosynthetic thickness under a selected presser-foot pressure.
Materials: Geosynthetics

ID: 00586
Determines geosynthetic thickness under a selected presser-foot pressure.
Materials: Geosynthetics

ID: 00587
Loads a restrained specimen to determine bursting or puncture resistance with the appropriate fixture.
Materials: Geosynthetics

ID: 00588
Measures force during tearing of a geosynthetic specimen held in test grips.
Materials: Geosynthetics

ID: 00589
For laboratory assessment of geosynthetic equivalent opening size using a sieve-type test assembly.
Materials: Geosynthetics

ID: 00590
Determines opening size of single-layer geotextile and similar materials by wet sieving.
Materials: Geosynthetics

ID: 00591
Prepares degassed, temperature-conditioned water for hydraulic geosynthetics testing.
Materials: Not assigned

ID: 00592
For assessing a plastic drainage strip core under compressive loading.
Materials: Geosynthetics

ID: 00593
Conditions geosynthetic specimens at elevated temperature for oxidation ageing tests.
Materials: Geosynthetics

ID: 00594
For exposing geosynthetic specimens to ultraviolet radiation under controlled conditions.
Materials: Geosynthetics

ID: 00595
Assesses geosynthetic resistance to impact by a falling steel cone.
Materials: Geosynthetics

ID: 00596
For conditioning geosynthetic specimens with automatic temperature and humidity control.
Materials: Geosynthetics

ID: 00597
Cuts circular material specimens for subsequent laboratory assessment.
Materials: Geosynthetics
Equipment selected for your application, with agreed adaptations to standard instruments when needed.
Discuss your applicationMenu and documentation translation into the agreed language, warranty support, service and on-site commissioning when needed.
Service