Electronic universal testing machines
Requirements for an electronic universal machine
The model description does not specify the edition year.

ID: 00023
Tension, compression and other mechanical tests with method-specific fixtures.
Materials: Not assigned
A 200 kN electromechanical universal machine for mechanical testing of specimens. Tension and compression are its principal test modes. Bending, shear, peel and tear tests require the corresponding fixtures.
The machine is selected for laboratory work assessing a specimen’s response to a defined mechanical load. The test determines the gripping arrangement, crosshead speed and required measurement method; a common load frame does not make these test setups interchangeable.
A ball-screw drive moves the crosshead and a computer-based system controls the test. Selection needs specimen dimensions, expected load, test speed and method. Usable test space depends on the installed grips and fixtures. Suitability for a particular specimen is confirmed when specifying the configuration. This model has an effective test width of 430 mm; the stated tensile space excludes grips and is reduced when they are installed.
| Parameter | Value |
|---|---|
| Tensile capacity | 200 kN |
| Accuracy class | 1 |
| Tensile space without grips | 1000 mm |
| Force indication error | ±1% |
| Force measuring range | 1–100% FS |
| Displacement indication error | ±0.5% |
| Displacement resolution | 0.05 μm |
| Power supply | 220 V ±10%, 50 Hz |
| Effective test width | 430 mm |
| Crosshead speed | 0.01–350 mm/min |
| Power stated in table | 1.5 kW |
| Test frame, L × W × H | 1000 × 800 × 2200 mm |
| Mass stated in table | ≈ 1100 kg |
Normative references stated in the technical description of this model.
Requirements for an electronic universal machine
The model description does not specify the edition year.
General testing-machine requirements
The model description does not specify the edition year.
To be confirmed for the selected model. Standard supply, grips, fixtures and options are listed separately for the selected configuration.