Electronic universal testing machines
Requirements for an electronic universal machine
The model description does not specify the edition year.

ID: 00025
Ring stiffness determination for thermoplastics pipes under compression.
Materials: Plastics
A 100 kN machine for determining the ring stiffness of thermoplastics pipes. A pipe specimen is loaded in compression and its resistance to deformation is evaluated using the chosen method.
Ring stiffness describes the resistance of a pipe cross-section to deformation under compression. Pipe-testing laboratories need to agree specimen preparation and deformation measurement rather than select a machine solely by maximum force.
The gantry frame and ball-screw drive accommodate pipe specimens between compression elements. Force is measured by a computer-based system. Selection checks pipe outside diameter, specimen length, expected force and the required platens. Test-space dimensions alone do not establish compatibility with a particular pipe and fixture combination. When comparing versions, check available pipe clearance and loading-system travel alongside force capacity.
| Parameter | Value |
|---|---|
| Maximum force | 100 kN |
| Accuracy class | 1 |
| Compression test space | 1500 mm |
| Force indication error | ±1% |
| Force measuring range | 1–100% FS |
| Displacement indication error | ±0.5% |
| Displacement resolution | 0.05 μm |
| Power supply | 220 V ±10%, 50 Hz |
| Power | 1.5 kW |
| Effective test width | 1000 mm |
| Crosshead speed | 0.01–500 mm/min |
| Test frame, L × W × H | 1540 × 700 × 2350 mm |
| Mass stated in table | ≈ 1500 kg |
Normative references stated in the technical description of this model.
Requirements for an electronic universal machine
The model description does not specify the edition year.
General testing-machine requirements
The model description does not specify the edition year.
Ring stiffness of thermoplastics pipes
The model description does not specify the edition year.
To be confirmed for the selected model. Standard supply, grips, fixtures and options are listed separately for the selected configuration.