Electronic universal testing machines
Requirements for an electronic universal machine
The model description does not specify the edition year.

ID: 00026
Mechanical testing of connectors and assemblies used in steel scaffolding.
Materials: Metals
A dedicated 200 kN electromechanical machine for testing steel scaffolding connectors. It applies load to a connection in the arrangement required by the selected test method.
This test concerns the assembled connection, so a separate metal specimen test cannot replace assessment of the fastening. Consistent connection positioning, load direction and an agreed endpoint are required for comparable results.
Fixtures are selected for the connector design, scaffolding component dimensions and loading direction. A quotation requires a drawing or specimen of the connection and a description of the intended test. Installation planning considers both the machine dimensions and the working space needed for fixtures and specimens.
| Parameter | Value |
|---|---|
| Maximum force | 200 kN |
| Accuracy class | 1 |
| Tensile space without grips | 800 mm |
| Force indication error | ±1% |
| Force measuring range | 1–100% FS |
| Displacement resolution | 0.05 μm |
| Working footprint, L × W × H | 1000 × 2550 × 2000 mm |
| Power supply | 220 V ±10%, 50 Hz |
| Power | 1.5 kW |
| Effective test width | 430 mm |
| Crosshead speed | 0.01–350 mm/min |
| Test frame, L × W × H | 1000 × 1500 × 2000 mm |
| Mass stated in table | ≈ 1500 kg |
Normative references stated in the technical description of this model.
Requirements for an electronic universal machine
The model description does not specify the edition year.
General testing-machine requirements
The model description does not specify the edition year.
To be confirmed for the selected model. Standard supply, grips, fixtures and options are listed separately for the selected configuration.