
ID: 00263
Los Angeles abrasion machine BT STMH-3
For assessing aggregate resistance to fragmentation and abrasion in a drum with steel balls.
Materials: Aggregates
- Drum rotation speed
- 30-33 rpm
- Power supply
- AC380V or AC220V
Application
For assessing aggregate resistance to fragmentation and abrasion in a drum with steel balls. The sample rotates in a steel drum with balls, undergoing combined impact and abrasive action. A counter sets revolutions and stops the drive at the end of the cycle.
Material loss is determined by processing the tested sample under the selected procedure.
Match drum geometry, speed and ball charge to the required test. Fraction preparation, revolution count and subsequent material checks follow the method.
Specifications
| Parameter | Value |
|---|---|
| Drum diameter and length | 711 x 508 mm+/-5mm |
| Drum rotation speed | 30-33 rpm |
| Power supply | AC380V or AC220V |
| Counter digits | 5 digits |
| Number of steel balls | 12 |
| Steel ball diameter | 46.8mm |
| Steel ball mass | 390-445g |
Scope of supply
To be confirmed for the selected model. Standard supply, grips, fixtures and options are listed separately for the selected configuration.
