
ID: 00283
Fine aggregate SSD cone and tamper BT STBHM-1
For determining the saturated surface-dry condition of fine aggregate.
Materials: Aggregates
Mould top diameterΦ40mm
- Mould bottom diameter
- Φ90mm
- Mould height
- 75mm
Application
The cone and tamper are used to check surface moisture in fine aggregate during preparation for density and water absorption tests. The sample behaviour after removing the mould helps establish the SSD condition.
The cone establishes the specimen condition before subsequent density and water-absorption measurements.
Assess the material’s behaviour after lifting the mould. A complete test also requires the weighing and volume-measurement equipment specified by the procedure.
Specifications
| Parameter | Value |
|---|---|
| Mould top diameter | Φ40mm |
| Mould bottom diameter | Φ90mm |
| Mould height | 75mm |
| Tamper diameter | Φ25mm |
| Tamper mass | 340g |
Scope of supply
To be confirmed for the selected model. Standard supply, grips, fixtures and options are listed separately for the selected configuration.
