
ID: 00287
Aggregate test sieves
For determining the particle-size distribution of sand and coarse aggregate.
Materials: Aggregates
- Frame diameter and height, option 1
- φ200mm, 50mm height
- Frame diameter and height, option 2
- φ300mm, 60mm height
Application
Laboratory test sieves separate a sample into fractions. Different frame diameters and aperture sizes are available for sand and stone aggregate. Larger openings use perforated plate and smaller openings use woven mesh. The required sieve selection is matched to the test method.
Mass retained on each sieve is used to determine the sample’s particle-size distribution.
Select the aperture sequence and compatible frames, pan and lid. The set must match the tested fraction and the laboratory’s sieving procedure.
Specifications
| Parameter | Value |
|---|---|
| Listed standard | ASTM-E11/95 |
| Frame diameter and height, option 1 | φ200mm, 50mm height |
| Frame diameter and height, option 2 | φ300mm, 60mm height |
| Frame diameter and height, option 3 | φ400mm, 70mm height |
| Frame layer thickness | 0.5mm/layer |
| Frame construction | Double layer |
| Sand sieve apertures | 0.075mm, 0.15mm, 0.6mm, 1.18mm, 2.36mm, 4.75mm, 9.5mm |
| Stone sieve apertures | 2.36mm, 4.75mm, 9.5mm, 13.2mm, 16mm, 19mm, 26.5mm, 31.5mm, 37.5mm, 53mm, 63mm, 75mm, 90mm |
| Perforated plate apertures | bigger than 1.18mm |
| Woven mesh apertures | smaller than 1.18mm |
Scope of supply
To be confirmed for the selected model. Standard supply, grips, fixtures and options are listed separately for the selected configuration.
