
ID: 00402
Bitumen bending creep tester BT STLRB-1
For investigating creep of a bitumen beam under bending.
Materials: Bitumen
- Moulded specimen thickness
- 6.35±0.05 mm
- Moulded specimen width
- 12.70±0.05 mm
Application
The instrument is intended for bending tests on a beam-shaped bitumen specimen. The calibration set includes steel beams, weights and displacement measures. Temperature range and sensor operating limits are confirmed when selecting the configuration.
Change in deflection over time is used to investigate creep in the adopted bending arrangement.
Agree beam preparation, temperature conditions and working load. Verify instrument operating ranges separately from mould and calibration-accessory dimensions.
Specifications
| Parameter | Value |
|---|---|
| Moulded specimen length | 127±2.0 mm |
| Moulded specimen thickness | 6.35±0.05 mm |
| Moulded specimen width | 12.70±0.05 mm |
| End-block thickness difference | Not exceeding 0.05 mm |
| Thick calibration beam length | 127±5.0 mm |
| Thick calibration beam width | 12.7±0.25 mm |
| Thick calibration beam thickness | 6.4±0.1 mm |
| Thin calibration beam length | 127±5 mm |
| Thin calibration beam width | 12.7±0.1 mm |
| Thin calibration beam thickness | 1.3±0.3 mm |
| Main calibration mass | 100.0±0.2 g |
| Additional weight mass | 2.0±0.2 g |
| Displacement calibration measures | 1; 3; 6 mm |
Scope of supply
To be confirmed for the selected model. Standard supply, grips, fixtures and options are listed separately for the selected configuration.
