Testing machines—General requirements
General requirements for the testing machine
The model description does not specify the edition year.

A 100 kN hydraulic machine for testing metal bars, sheet, tubes, reinforcing steel and fasteners. Its main purpose is to evaluate specimen behaviour under tensile loading. Suitable fixtures also allow metal bending and concrete compression tests.
A tensile test requires axial load transfer without grip slippage or premature damage at the clamping points. Grip selection and preparation of the specimen ends therefore matter alongside the machine force rating.
A six-column frame and servo-hydraulic control form the test system. Selection depends on the expected force, specimen dimensions and gripping method. Round and flat specimen grips, bending supports and compression platens serve different tasks; one fixture type does not replace the others. For this model, the round-specimen range is Ø6–20 mm and the tensile space is 650 mm; check both limits with the selected grips.
| Parameter | Value |
|---|---|
| Tensile capacity | 100 kN |
| Accuracy class | 1 |
| Tensile space | 650 mm |
| Force indication error | ±1% |
| Force measuring range | 4–100% FS |
| Lower grip positioning speed | 300 mm/min |
| Piston travel | 200 mm |
| Maximum bending support span | 300 mm |
| Power supply | 380 V ±10% |
| Power | 1.5 kW |
| Control cabinet, L × W × H | 600 × 650 × 1400 mm |
| Control cabinet mass | 300 kg |
| Effective test width | 350 mm |
| Flat specimen thickness | 0–15 mm |
| Maximum flat specimen width | 75 mm |
| Round specimen diameter | Ø6–20 mm |
| Test frame, L × W × H | 580 × 440 × 1700 mm |
| Mass stated in table | 1100 kg |
Normative references stated in the technical description of this model.
General requirements for the testing machine
The model description does not specify the edition year.
Requirements for a servo-hydraulic universal machine
The model description does not specify the edition year.
Room-temperature tensile testing of metals
The model description does not specify the edition year.
To be confirmed for the selected model. Standard supply, grips, fixtures and options are listed separately for the selected configuration.