
ID: 00001
Concrete pull-out tester MIT STOUN 55
Determines in-situ concrete strength from anchor pull-out force. Maximum force: 55 kN.
Materials: Concrete
- Working load range
- 5.5–55 kN
- Load measurement error
- ±1 %
Choose an equipment group or open a product page.
Presses and testing machines
Sample preparation
Weighing and measurement
Fixtures and accessories
Abrasion and wear
Strength and crushing
Durability testing
Mixing and dispersion
Fresh concrete testing
Concrete properties
ID: 00001
Determines in-situ concrete strength from anchor pull-out force. Maximum force: 55 kN.
Materials: Concrete

ID: 00013
Automatically controlled compression tests of cement, concrete and rock.
Materials: Cement, Concrete, Rock

ID: 00006
Tensile testing of metal specimens; compression and bending with suitable fixtures.

ID: 00007
Tensile testing of metal specimens; compression and bending with suitable fixtures.

ID: 00008
Tensile testing of metal specimens; compression and bending with suitable fixtures.

ID: 00009
Tensile testing of metal specimens; compression and bending with suitable fixtures.

ID: 00011
Tensile testing of reinforcing steel and strand with specimen-specific fixtures.

ID: 00012
Tensile testing of reinforcing steel and strand with specimen-specific fixtures.

ID: 00015
Compression strength tests of cement, concrete and rock with digital load indication.
Materials: Cement, Concrete, Rock

ID: 00017
Compression and flexural testing of concrete kerbstones and paving products.
Materials: Concrete

ID: 00018
Compression tests of cement, concrete and rock with computer-controlled loading.
Materials: Cement, Concrete, Rock

ID: 00019
Compression tests of cement, concrete and rock with computer-controlled loading.
Materials: Cement, Concrete, Rock

ID: 00027
Compression and bending of blocks, bricks, panels, tiles and stone products.
Materials: Concrete, Ceramics, Rock

ID: 00028
Compression and bending of blocks, bricks, panels, tiles and stone products.
Materials: Concrete, Ceramics, Rock

ID: 00031
Load-bearing capacity and residual deformation of manhole covers.
Materials: Metals, Plastics, Concrete

ID: 00412
Compacts concrete in moulds during laboratory specimen preparation.
Materials: Concrete

ID: 00413
Compacts concrete in moulds during laboratory specimen preparation.
Materials: Concrete

ID: 00414
Compacts concrete in moulds during laboratory specimen preparation.
Materials: Concrete

ID: 00415
Compacts concrete in moulds during laboratory specimen preparation.
Materials: Concrete

ID: 00416
Compacts concrete specimens on a table with magnetic mould retention.
Materials: Concrete

ID: 00417
Compacts concrete specimens on a table with magnetic mould retention.
Materials: Concrete

ID: 00418
Prepares laboratory batches of concrete.
Materials: Concrete

ID: 00419
Prepares laboratory batches of concrete.
Materials: Concrete

ID: 00420
Mixes concrete in a laboratory bowl using twin horizontal shafts.
Materials: Concrete

ID: 00421
Prepares concrete for laboratory testing.
Materials: Concrete

ID: 00422
Determines concrete setting time from penetration resistance of its mortar fraction.
Materials: Concrete

ID: 00423
Determines concrete setting time from penetration resistance of its mortar fraction.
Materials: Concrete

ID: 00424
Determines concrete setting time from penetration resistance of its mortar fraction.
Materials: Concrete

ID: 00425
Tests cement and concrete specimens for abrasion resistance.

ID: 00426
Assesses specimen resistance to water penetration under pressure.
Materials: Concrete

ID: 00427
Assesses specimen resistance to water penetration under pressure.
Materials: Concrete

ID: 00428
Assesses specimen resistance to water penetration under pressure.
Materials: Concrete

ID: 00429
Assesses specimen resistance to water penetration under pressure.
Materials: Concrete

ID: 00430
Assesses specimen resistance to water penetration under pressure.
Materials: Concrete

ID: 00431
Installs and extracts specimens in moulds used for concrete water-impermeability tests.
Materials: Concrete

ID: 00432
Determines air content in fresh concrete.
Materials: Concrete

ID: 00433
Determines air content in fresh concrete.
Materials: Concrete

ID: 00434
Determines air content in fresh concrete.
Materials: Concrete

ID: 00435
Supports laboratory assessment of chloride transport through concrete.
Materials: Concrete

ID: 00437
Supports dynamic elastic modulus assessment of concrete specimens.
Materials: Concrete

ID: 00438
Measures concrete specimen deformation during static elastic-modulus testing.
Materials: Concrete

ID: 00439
Measures concrete specimen deformation for static elastic-modulus testing.
Materials: Concrete

ID: 00440
Measures concrete specimen deformation for static elastic-modulus testing.
Materials: Concrete

ID: 00441
Assesses concrete consistency by the time required for remoulding under vibration.
Materials: Concrete

ID: 00442
Measures concrete specimen length changes for shrinkage and expansion studies.
Materials: Concrete

ID: 00443
Measures concrete specimen length changes for shrinkage and expansion studies.
Materials: Concrete

ID: 00444
Assesses segregation of self-compacting concrete.
Materials: Concrete

ID: 00445
Assesses self-compacting concrete passing through a bar obstacle.
Materials: Concrete

ID: 00447
Determines self-compacting concrete passing ability.
Materials: Concrete

ID: 00448
Determines the flow time of self-compacting concrete.
Materials: Concrete

ID: 00449
Assesses filling of a test box by self-compacting concrete under its own weight.
Materials: Concrete

ID: 00450
Assesses fresh concrete consistency by cone slump.
Materials: Concrete

ID: 00451
Assesses fresh concrete consistency by cone slump.
Materials: Concrete

ID: 00452
Assesses fresh concrete consistency by cone slump.
Materials: Concrete

ID: 00453
Assesses fresh concrete consistency by cone slump.
Materials: Concrete

ID: 00454
Assesses fresh concrete consistency by cone slump.
Materials: Concrete

ID: 00455
Assesses fresh concrete consistency by cone slump.
Materials: Concrete

ID: 00456
Measures height for concrete slump assessment.
Materials: Concrete

ID: 00457
Assesses concrete workability by the compacting factor method.
Materials: Concrete

ID: 00458
Determines chloride ion content in a prepared laboratory sample.
Materials: Concrete

ID: 00459
Assesses concrete mixture bleeding under applied pressure.
Materials: Concrete

ID: 00460
Base plate for self-compacting concrete flow-spread assessment.
Materials: Concrete

ID: 00461
Base plate for self-compacting concrete flow-spread assessment.
Materials: Concrete

ID: 00462
Electrical measurement for laboratory concrete assessment.
Materials: Concrete

ID: 00463
Monitors free shrinkage deformation of concrete after moulding.
Materials: Concrete

ID: 00464
Produces cylindrical concrete specimens of the specified size.
Materials: Concrete

ID: 00465
Produces cylindrical concrete specimens of the specified size.
Materials: Concrete

ID: 00466
Produces cylindrical concrete specimens of the specified size.
Materials: Concrete

ID: 00467
Produces cylindrical concrete specimens of the specified size.
Materials: Concrete

ID: 00468
Produces cylindrical concrete specimens of the specified size.
Materials: Concrete

ID: 00469
For moulding cylindrical concrete specimens.
Materials: Concrete

ID: 00470
For moulding cylindrical concrete specimens.
Materials: Concrete

ID: 00471
For preparing concrete cube specimens.
Materials: Concrete

ID: 00472
For preparing concrete cube specimens.
Materials: Concrete

ID: 00473
For preparing concrete cube specimens.
Materials: Concrete

ID: 00474
For preparing concrete cube specimens.
Materials: Concrete

ID: 00475
For preparing concrete cube specimens.
Materials: Concrete

ID: 00476
For preparing concrete cube specimens.
Materials: Concrete

ID: 00483
For preparing concrete beams before flexural testing.
Materials: Concrete

ID: 00484
For preparing concrete beams before flexural testing.
Materials: Concrete

ID: 00485
For moulding a laboratory specimen of the specified geometry.
Materials: Concrete

ID: 00486
For moulding a laboratory specimen of the specified geometry.
Materials: Concrete

ID: 00487
For moulding a laboratory specimen of the specified geometry.
Materials: Concrete

ID: 00488
For moulding a laboratory specimen of the specified geometry.
Materials: Concrete

ID: 00490
Transfers load to a concrete specimen during flexural testing.
Materials: Concrete

ID: 00491
Establishes load transfer for a concrete splitting test.
Materials: Concrete

ID: 00493
Accessory for preparing a concrete cylinder for compression testing.
Materials: Concrete

ID: 00494
Accessory for preparing a concrete cylinder for compression testing.
Materials: Concrete

ID: 00495
Accessory for preparing a concrete cylinder for compression testing.
Materials: Concrete

ID: 00496
Accessory for preparing a concrete cylinder for compression testing.
Materials: Concrete

ID: 00497
For vibration compaction of concrete during specimen preparation.
Materials: Concrete

ID: 00498
For moulding cylindrical concrete specimens.
Materials: Concrete

ID: 00499
For moulding cylindrical concrete specimens.
Materials: Concrete

ID: 00502
For preparing prismatic concrete specimens.
Materials: Concrete

ID: 00503
Tests concrete specimens under water pressure using pneumatic sealing.
Materials: Concrete

ID: 00507
Prepares cylindrical concrete and rock specimen surfaces.

ID: 00508
Prepares cubic and cylindrical rock and concrete specimens.
Try another search or reset the filters.

ID: 00436
Prepares water-saturated specimens using vacuum.
Materials: Not assigned

ID: 00446
Mechanical treatment of a laboratory sample by jolting the table.
Materials: Not assigned

ID: 00477
For moulding cubic laboratory specimens.
Materials: Not assigned

ID: 00478
For preparing specimens for assessment of cracking.
Materials: Not assigned

ID: 00479
For preparing cement mortar cube specimens.
Materials: Cement

ID: 00480
For preparing cement mortar cube specimens.
Materials: Cement

ID: 00481
For preparing mortar bars when investigating aggregate reactivity.
Materials: Aggregates

ID: 00482
For preparing cement mortar prism specimens.
Materials: Cement

ID: 00489
For moulding a laboratory specimen of the specified geometry.
Materials: Cement

ID: 00492
For installation inside a compatible mould during specimen preparation.
Materials: Not assigned

ID: 00500
For pressure-water washing of bridge deck plates.
Materials: Not assigned

ID: 00501
For cleaning compatible laboratory fixtures and accessories.
Materials: Not assigned
Try another search or reset the filters.
Equipment selected for your application, with agreed adaptations to standard instruments when needed.