Testing machines—General requirements
General requirements for the testing machine
The model description does not specify the edition year.

A 1000 kN servo-hydraulic tensile machine for reinforcing steel and steel strand. It evaluates the mechanical behaviour of metal specimens under load. Metal bending and concrete compression require the corresponding fixtures.
This equipment serves laboratories testing different metallic specimens on a shared load frame. Correct load transfer is essential: strand and reinforcing bar require different gripping arrangements.
The six-column frame accommodates different fixture types. Configuration is selected after establishing the specimen type, cross-section and length, required force and test method. Rebar grips and strand fixtures are specified separately because the two specimen types require different gripping arrangements.
| Parameter | Value |
|---|---|
| Tensile capacity | 1000 kN |
| Accuracy class | 1 |
| Tensile space | 700 mm |
| Force indication error | ±1% |
| Force measuring range | 4–100% FS |
| Steel strand diameter | 15.2 mm |
| Piston travel | 200 mm |
| Maximum bending support span | 300 mm |
| Lower grip positioning speed | 300 mm/min |
| Power supply | 380 V ±10% |
| Power | 1.5 kW |
| Effective test width | 490 mm |
| Flat specimen thickness | 0–40 mm |
| Maximum flat specimen width | 90 mm |
| Round specimen diameter | Ø14–40 mm |
| Test frame, L × W × H | 780 × 540 × 2520 mm |
| Mass stated in table | 2100 kg |
Normative references stated in the technical description of this model.
General requirements for the testing machine
The model description does not specify the edition year.
Requirements for a servo-hydraulic universal machine
The model description does not specify the edition year.
Room-temperature tensile testing of metals
The model description does not specify the edition year.
To be confirmed for the selected model. Standard supply, grips, fixtures and options are listed separately for the selected configuration.