Tension/compression testing machines—Calibration and verification of the force-measuring system
Force-system calibration and verification
The model description does not specify the edition year.

ID: 00014
Compression and flexural strength testing of cement specimens on one system.
Materials: Cement
This system combines separate working stations for compression and flexural strength testing of cement specimens. The compression station is rated at 300 kN; the flexure station has its own capacity, listed in the specifications.
For a cement laboratory, these are successive strength-control operations using the prescribed specimen preparation and loading procedure. Compression and flexural results are considered separately because they describe different loading conditions.
The two stations support both test types with the corresponding supports and platens. Specimen dimensions, loading arrangement and test method are agreed when specifying the equipment. The compression capacity must not be used as the permissible load for the flexure station.
| Parameter | Value |
|---|---|
| Compression capacity | 300 kN |
| Accuracy class | 0.5 |
| Force indication error | ±0.5% |
| Force measuring range | 0.5–100% FS |
| Maximum flexure force | 10 kN |
| Flexure actuator travel | 60 mm |
| Compression piston travel | 80 mm |
| Standard specimen dimensions | 40 × 40 × 160 mm |
| Compression test width | 180 mm |
| Compression test height | 180 mm |
| Power supply | 380 V ±10% |
| Power | 1.1 kW |
| Test frame, L × W × H | 1210 × 470 × 1220 mm |
| Mass stated in table | 400 kg |
Normative references stated in the technical description of this model.
Force-system calibration and verification
The model description does not specify the edition year.
Cement-mortar flexural and compressive strength
The model description does not specify the edition year.
To be confirmed for the selected model. Standard supply, grips, fixtures and options are listed separately for the selected configuration.