
ID: 00013
Automatic compression press BT YAW-2000
Automatically controlled compression tests of cement, concrete and rock.
Materials: Cement, Concrete, Rock
- Accuracy class
- 1
- Compression test space
- 320 mm
Choose an equipment group or open a product page.
Presses and testing machines
Sample preparation
Fixtures and accessories
Sieving and particle-size analysis
Abrasion and wear
Temperature conditioning and aging
Mixing and dispersion
Flow and workability
Specific surface
Setting time
Volume change
Chemical analysis
ID: 00013
Automatically controlled compression tests of cement, concrete and rock.
Materials: Cement, Concrete, Rock

ID: 00014
Compression and flexural strength testing of cement specimens on one system.
Materials: Cement

ID: 00015
Compression strength tests of cement, concrete and rock with digital load indication.
Materials: Cement, Concrete, Rock

ID: 00016
Vertical load-bearing tests of prefabricated ventilation duct products.
Materials: Cement

ID: 00018
Compression tests of cement, concrete and rock with computer-controlled loading.
Materials: Cement, Concrete, Rock

ID: 00019
Compression tests of cement, concrete and rock with computer-controlled loading.
Materials: Cement, Concrete, Rock

ID: 00425
Tests cement and concrete specimens for abrasion resistance.

ID: 00479
For preparing cement mortar cube specimens.
Materials: Cement

ID: 00480
For preparing cement mortar cube specimens.
Materials: Cement

ID: 00482
For preparing cement mortar prism specimens.
Materials: Cement

ID: 00489
For moulding a laboratory specimen of the specified geometry.
Materials: Cement

ID: 00520
Prepares cement paste for laboratory binder testing.
Materials: Cement

ID: 00521
Mixes cement paste in an enclosed working area with electric bowl lifting.
Materials: Cement

ID: 00522
Prepares cement mortar for subsequent specimen production and testing.
Materials: Cement

ID: 00523
Prepares mortar in an enclosed mixing assembly with electric bowl lifting.
Materials: Cement

ID: 00524
Compacts mortar in a mould during laboratory specimen preparation.
Materials: Cement

ID: 00525
Compacts cement mortar in a mould with touchscreen cycle control.
Materials: Cement

ID: 00526
Determines flexural strength of cement mortar and other brittle non-metallic materials.
Materials: Cement

ID: 00527
Tests cement mortar in flexure with digital load indication.
Materials: Cement

ID: 00528
Measures flexural load on cement mortar with peak-value retention.
Materials: Cement

ID: 00529
Determines cement fineness from sieve residue under negative-pressure air-jet sieving.
Materials: Cement

ID: 00530
Determines cement fineness by air-jet sieving with digital indication.
Materials: Cement

ID: 00531
Grinds and mixes material in a drum during laboratory sample preparation.
Materials: Cement

ID: 00532
Heats cement paste specimens in water during soundness assessment.
Materials: Cement

ID: 00533
Heats cement specimens in water and releases steam through the provided outlet pipe.
Materials: Cement

ID: 00534
Assesses cement mortar workability from its spread after a series of drops.
Materials: Cement

ID: 00535
Used to assess mortar workability from its spread with manual operation.
Materials: Cement

ID: 00536
Determines cement-mortar flow from its spread after a prescribed drop cycle.
Materials: Cement

ID: 00537
Forms a cement-mix specimen to a defined geometry.
Materials: Cement

ID: 00538
Evaluates cement-powder specific surface by air permeability.
Materials: Cement

ID: 00539
Automates readings in air-permeability determination of cement specific surface.
Materials: Cement

ID: 00540
Determines cement-paste consistency and setting time from penetration of the selected tool.
Materials: Cement

ID: 00541
Determines cement-paste consistency and setting time from penetration of the selected tool.
Materials: Cement

ID: 00542
Determines cement-paste setting time with an automated measurement cycle.
Materials: Cement

ID: 00543
Checks mould extensibility and supports readings of pointer separation.
Materials: Cement

ID: 00544
Evaluates cement-grout flow by discharge through a cone.
Materials: Cement

ID: 00546
Compares specimen length in shrinkage and expansion work.
Materials: Cement

ID: 00547
Supports sample treatment and chloride determination using heating and distillation.
Materials: Cement

ID: 00548
Supports free calcium oxide determination in cement laboratory work.
Materials: Cement

ID: 00549
Collects powdered-cement samples through the openings of a tubular probe.
Materials: Cement

ID: 00550
Collects powdered-cement samples through the openings of a tubular probe.
Materials: Cement

ID: 00551
Collects powdered-cement samples through the openings of a tubular probe.
Materials: Cement

ID: 00552
Provides specimen treatment within the stated pressure and temperature limits.
Materials: Cement

ID: 00553
Provides autoclave exposure for assessing cement-specimen volume stability.
Materials: Cement

ID: 00554
Measures specimen length change against a reference reading.
Materials: Cement

ID: 00557
Determines initial and final setting of cement paste using weighted needles.
Materials: Cement

ID: 00561
Used to determine cement density from displaced liquid volume.
Materials: Cement

ID: 00564
For organised storage and identification of cement samples.
Materials: Cement

ID: 00565
For wet sieving of cement material.
Materials: Cement

ID: 00567
For assessing cement soundness through the change in indicator spacing.
Materials: Cement

ID: 00568
Prepares cement paste using planetary blade motion.
Materials: Cement

ID: 00569
Prepares cement mortar for specimen moulding and subsequent testing.
Materials: Cement

ID: 00570
Compacts cement mortar in moulds through repeated jolting.
Materials: Cement

ID: 00571
For assessing cement paste through needle or plunger penetration.
Materials: Cement

ID: 00572
Provides water heating and timed exposure for cement specimens.
Materials: Cement

ID: 00573
For assessing cement soundness under elevated temperature and pressure.
Materials: Cement
Try another search or reset the filters.

ID: 00477
For moulding cubic laboratory specimens.
Materials: Not assigned

ID: 00478
For preparing specimens for assessment of cracking.
Materials: Not assigned

ID: 00481
For preparing mortar bars when investigating aggregate reactivity.
Materials: Aggregates

ID: 00545
Measures pH of aqueous solutions in laboratory work.
Materials: Not assigned

ID: 00555
Heats small specimens and items in a chamber for laboratory treatment.
Materials: Not assigned

ID: 00556
Heats small specimens and items in a chamber for laboratory treatment.
Materials: Not assigned

ID: 00558
Produces distilled water for laboratory operations.
Materials: Not assigned

ID: 00559
Produces distilled water for laboratory operations.
Materials: Not assigned

ID: 00560
Produces distilled water for laboratory operations.
Materials: Not assigned
ID: 00562
For preparing solutions and establishing a defined laboratory volume.
Materials: Not assigned

ID: 00563
For preparing solutions and establishing a defined laboratory volume.
Materials: Not assigned

ID: 00566
For liquid delivery and volume readings during laboratory preparation and analysis.
Materials: Not assigned
Try another search or reset the filters.
Equipment selected for your application, with agreed adaptations to standard instruments when needed.