Tension/compression testing machines—Calibration and verification of the force-measuring system
Force-system calibration and verification
The model description does not specify the edition year.

ID: 00016
Vertical load-bearing tests of prefabricated ventilation duct products.
Materials: Cement
A dedicated 300 kN press for cement-based and reinforced ventilation ducts. It evaluates the ability of a duct product to carry vertical compressive loading.
This test evaluates the finished duct rather than only the strength of its constituent material. Duct geometry, end condition and the way force is transferred through the bearing surfaces influence the result.
A computer-based system controls loading of the installed product. Equipment selection checks duct height, shape, bearing surfaces and the required loading arrangement. Fixtures and product positioning are agreed from the customer’s drawing or specimen.
| Parameter | Value |
|---|---|
| Compression capacity | 300 kN |
| Accuracy class | 1 |
| Compression test space | 100–1200 mm |
| Force measuring range | 1–100% FS |
| Maximum cylinder travel | 150 mm |
| Piston speed | 0–50 mm/min |
| Power supply | 380 V ±10%, 50 Hz |
| Test frame, L × W × H | 900 × 620 × 3400 mm |
| Mass stated in table | 1400 kg |
Normative references stated in the technical description of this model.
Force-system calibration and verification
The model description does not specify the edition year.
To be confirmed for the selected model. Standard supply, grips, fixtures and options are listed separately for the selected configuration.