Tension/compression testing machines—Calibration and verification of the force-measuring system
Force-system calibration and verification
The model description does not specify the edition year.

ID: 00017
Compression and flexural testing of concrete kerbstones and paving products.
Materials: Concrete
A 600 kN gantry system for concrete kerbstones and paving products. It performs compression and bending tests using supports matched to the product shape.
Testing a finished paving product assesses its resistance to a specified loading arrangement. Comparable results require consistent support conditions and load application positions.
Servo-hydraulic loading and an adjustable support span allow the loading arrangement to be prepared for the product. Configuration checks include product length and cross-section, bearing surfaces and the load application point. Testing a different product shape requires separate confirmation.
| Parameter | Value |
|---|---|
| Compression capacity | 600 kN |
| Accuracy class | 0.5 |
| Force measuring range | 0.4–100% FS |
| Maximum specimen dimensions | 750 × 1000 mm |
| Flexure test height | 400 mm |
| Compression test height | 200 mm |
| Adjustable support span | 150–1000 mm |
| Piston speed | 100 mm/min |
| Power | 1.5 kW |
| Power supply options | 380 V ±10% / 220 V ±10%, 50 Hz |
| Test frame, L × W × H | 1220 × 1100 × 1850 mm |
| Mass stated in table | 1200 kg |
Normative references stated in the technical description of this model.
Force-system calibration and verification
The model description does not specify the edition year.
Wall-brick compressive strength
The model description does not specify the edition year.
To be confirmed for the selected model. Standard supply, grips, fixtures and options are listed separately for the selected configuration.