Tension/compression testing machines—Calibration and verification of the force-measuring system
Force-system calibration and verification
The model description does not specify the edition year.

A 1000 kN press for cast-iron, polymer-composite and reinforced-concrete manhole covers. It evaluates load-bearing capacity and residual deformation under the specified loading arrangement. Load is applied to a cover placed on the agreed support. Results describe the product in that test arrangement, so support and loading-element positions must be established beforehand.
Residual-deformation assessment depends on the specified loading sequence as well as the maximum applied force.
Provide cover and frame drawings, the support arrangement and the intended test programme. Check that the assembly fits the test space and establish how deformation will be measured.
| Parameter | Value |
|---|---|
| Maximum force | 1000 kN |
| Accuracy class | 1 |
| Compression test space | 275 mm |
| Deformation indication error | ±1% |
| Deformation resolution | 0.01 mm |
| Piston travel | 200 mm |
| Maximum piston speed | 80 mm/min |
| Upper platen diameter | Ø300 mm |
| Lower platen diameter | Ø356 mm |
| Table front-to-back dimension | 1250 mm |
| Power supply | 380 V ±10%, 50 Hz |
| Power | 1.5 kW |
| Effective test width | 1200 mm |
| Mass stated in table | ≈ 2200 kg |
Normative references stated in the technical description of this model.
Force-system calibration and verification
The model description does not specify the edition year.
General testing-machine requirements
The model description does not specify the edition year.
To be confirmed for the selected model. Standard supply, grips, fixtures and options are listed separately for the selected configuration.