
ID: 00064
Medium-pressure soil triaxial testing system BT STSZ-2
For determining soil strength and deformation characteristics under triaxial loading.
Materials: Soil
- Specimen size
- Φ39.1×80mm,
Φ61.8×125mm - Lifting speed
- 0.003~4.800 mm/min
Application
For determining soil strength and deformation characteristics under triaxial loading. Triaxial testing combines axial loading with pressure around the specimen. Strength and deformation can thus be considered under defined confinement conditions, which must be established in the laboratory test programme.
The system assesses strength and deformation using UU, CU and CD procedures with the corresponding specimen preparation.
Agree specimen dimensions and required pressures together with deformation acquisition. Relate the separately listed lifting and displacement speed ranges to the operating modes of the selected configuration.
Specifications
| Parameter | Value |
|---|---|
| Axial load | 30kN |
| Specimen size | Φ39.1×80mm,Φ61.8×125mm |
| Lifting speed | 0.003~4.800 mm/min |
| Displacement rate | 0.001-5mm/min |
| Maximum stroke | 50mm |
| Maximum confining pressure | 2.5MPa |
| Maximum back pressure | 1MPa |
| Pore-water pressure | 0-2MPa |
| Volume change range | 0-50ml |
| Minimum volume division | 0.1ml |
| Axial displacement range | 0-30mm |
Scope of supply
To be confirmed for the selected model. Standard supply, grips, fixtures and options are listed separately for the selected configuration.
