
ID: 00035
Three-position medium-pressure consolidation apparatus BT WG-1B
For consolidation testing of soil specimens under stepped loading.
Materials: Soil
- Specimen area
- 30cm2, 50cm2
- Specimen count
- 3
Choose an equipment group or open a product page.
Sample preparation
Cabinets and chambers
Weighing and measurement
Consolidation apparatus
Shear testing
Triaxial testing
Permeability testing
Compaction and CBR
Soil properties
Fixtures and accessories
Field geotechnical testing
ID: 00035
For consolidation testing of soil specimens under stepped loading.
Materials: Soil

ID: 00036
For consolidation testing of soil specimens under stepped loading.
Materials: Soil

ID: 00037
For soil consolidation tests with automatic loading and data acquisition.
Materials: Soil

ID: 00038
For automated soil consolidation testing at multiple test positions.
Materials: Soil

ID: 00039
For soil consolidation testing with axial load and pore-water pressure monitoring.
Materials: Soil

ID: 00040
For measuring pore-water pressure during soil testing.
Materials: Soil

ID: 00041
For soil consolidation testing, including field use.
Materials: Soil

ID: 00042
For investigating the compression of waste-containing soils under vertical loading.
Materials: Soil

ID: 00043
For consolidation testing of unsaturated soils with air-pressure control.
Materials: Soil

ID: 00044
For direct shear testing of unsaturated soils at a controlled displacement rate.
Materials: Soil

ID: 00045
For determining soil shear resistance under vertical and horizontal loading.
Materials: Soil

ID: 00046
For determining the direct shear resistance of soil specimens.
Materials: Soil

ID: 00047
For determining the direct shear resistance of soil specimens.
Materials: Soil

ID: 00048
For determining the direct shear resistance of soil specimens.
Materials: Soil

ID: 00049
For shear testing of four soil specimens under different vertical pressures.
Materials: Soil

ID: 00050
For direct shear testing of soil with load and horizontal displacement measurement.
Materials: Soil

ID: 00051
For shear testing of four soil specimens under different vertical pressures.
Materials: Soil

ID: 00052
For shear testing of four soil specimens under different vertical pressures.
Materials: Soil

ID: 00053
For direct shear testing of material under vertical and horizontal loading.
Materials: Soil

ID: 00054
For loading a specimen vertically and transversely while monitoring displacement.
Materials: Soil

ID: 00055
For testing interface shear resistance under a specified vertical pressure.
Materials: Soil

ID: 00057
For ring shear testing of soil specimens.
Materials: Soil

ID: 00058
For loading a specimen vertically and transversely while monitoring displacement.
Materials: Soil

ID: 00059
For direct shear testing of soil while heating or cooling the specimen.
Materials: Soil

ID: 00060
For preloading soil specimens before direct shear testing.
Materials: Soil

ID: 00061
For preloading soil specimens with pneumatic pressure control.
Materials: Soil

ID: 00062
For determining the shear resistance of coarse-grained soil under axial loading and confining pressure.
Materials: Soil

ID: 00063
For determining soil strength under triaxial loading.
Materials: Soil

ID: 00064
For determining soil strength and deformation characteristics under triaxial loading.
Materials: Soil

ID: 00065
For determining soil strength and deformation characteristics under triaxial loading.
Materials: Soil

ID: 00066
For triaxial soil testing with axial loading and pressure control.
Materials: Soil

ID: 00068
For mechanical specimen testing using the appropriate test accessories.
Materials: Soil

ID: 00069
For triaxial, shear and permeability testing with load or displacement control.
Materials: Soil

ID: 00070
For permeability testing of soil specimens.
Materials: Soil

ID: 00071
For permeability testing of soil specimens.
Materials: Soil

ID: 00072
For use with the ST55-2 permeameter.
Materials: Soil

ID: 00073
For determining the permeability coefficient of sandy and non-cohesive soils under constant head.
Materials: Soil

ID: 00075
For determining the liquid limit of soil by the cup method.
Materials: Soil

ID: 00076
For determining the moisture content below which drying causes no further soil shrinkage.
Materials: Soil

ID: 00077
For determining soil moisture content at the boundary between plastic and semi-solid states.
Materials: Soil

ID: 00078
For determining soil linear shrinkage from the change in specimen length during drying.
Materials: Soil

ID: 00079
For determining soil liquid and plastic limits using cone penetration.
Materials: Soil

ID: 00080
For determining soil liquid and plastic limits using cone penetration.
Materials: Soil

ID: 00081
For determining soil liquid and plastic limits using cone penetration.
Materials: Soil

ID: 00082
For determining the unconfined compressive strength of cohesive and semi-cohesive soils.
Materials: Soil

ID: 00083
For determining specimen moisture content by weighing and drying.
Materials: Soil

ID: 00084
For rapid determination of sand water content without external power.
Materials: Soil

ID: 00085
For determining specimen moisture content by weighing and drying.
Materials: Soil

ID: 00086
For determining moisture content from specimen mass loss during drying.
Materials: Soil

ID: 00087
For compression testing of frozen soil with displacement measurement.
Materials: Soil

ID: 00088
For mechanical loading of soil to investigate its strength characteristics.
Materials: Soil

ID: 00089
For pavement material strength, CBR and rebound modulus testing.
Materials: Soil

ID: 00090
For pavement material strength, CBR and rebound modulus testing.
Materials: Soil

ID: 00091
For pavement material strength, CBR and rebound modulus testing.
Materials: Soil

ID: 00092
For mechanical testing of pavement materials, including uniaxial compression, bending and CBR.
Materials: Soil

ID: 00093
For mixing cement-stabilised soil during test specimen preparation.
Materials: Soil

ID: 00094
For determining the California bearing ratio of soils and pavement materials.
Materials: Soil

ID: 00095
For determining the California bearing ratio of soils and pavement materials.
Materials: Soil

ID: 00096
For preparing and conducting CBR tests with specimen swell measurement.
Materials: Soil

ID: 00097
For use in CBR testing.
Materials: Soil

ID: 00098
For impact compaction of soil specimens in a cylindrical mould.
Materials: Soil

ID: 00099
For impact compaction of soil specimens in a cylindrical mould.
Materials: Soil

ID: 00100
For impact compaction of soil specimens in a cylindrical mould.
Materials: Soil

ID: 00101
For impact compaction of soil specimens in a cylindrical mould.
Materials: Soil

ID: 00102
For automatic layer-by-layer compaction of soil specimens in a mould.
Materials: Soil

ID: 00103
For automatic layer-by-layer compaction of soil specimens in a mould.
Materials: Soil

ID: 00104
For automatic impact compaction of soil specimens in a mould.
Materials: Soil

ID: 00105
For light and heavy impact compaction of specimens in a large mould.
Materials: Soil

ID: 00106
For impact compaction of soil specimens using light or heavy compaction settings.
Materials: Soil

ID: 00107
For compacting Proctor and CBR soil specimens and asphalt specimens.
Materials: Soil

ID: 00108
For removing cylindrical specimens from test moulds.
Materials: Soil

ID: 00109
For removing cylindrical specimens from test moulds.
Materials: Soil

ID: 00111
For removing cylindrical specimens from moulds using axial force.
Materials: Soil

ID: 00112
For removing cylindrical specimens from moulds using axial force.
Materials: Soil

ID: 00113
For removing specimens from test moulds.
Materials: Soil

ID: 00114
For removing cylindrical specimens from moulds using axial force.
Materials: Soil

ID: 00115
For removing specimens from test moulds.
Materials: Soil

ID: 00116
For extruding soil specimens from thin-walled or sand samplers.
Materials: Soil

ID: 00117
For extruding soil specimens from thin-walled or sand samplers.
Materials: Soil

ID: 00118
Forms specimens and extrudes them from molds for laboratory testing.
Materials: Soil

ID: 00119
Compacts soil by surface vibration.
Materials: Soil

ID: 00120
Determines maximum dry density of coarse-grained soil using a vibrating table.
Materials: Soil

ID: 00121
Forms semi-rigid pavement base specimens by vibration compaction.
Materials: Soil

ID: 00122
Forms semi-rigid pavement base specimens by vibration compaction.
Materials: Soil

ID: 00123
Supports load testing to determine resilient modulus.
Materials: Soil

ID: 00124
Dries soil samples in a chamber with circulating hot air.
Materials: Soil

ID: 00125
Dries soil samples under controlled temperature with forced air.
Materials: Soil

ID: 00126
Dries soil samples under controlled temperature with forced air.
Materials: Soil

ID: 00127
Dries soil samples under controlled temperature with forced air.
Materials: Soil

ID: 00128
Dries soil samples under controlled temperature with forced air.
Materials: Soil

ID: 00129
Dries soil samples at a controlled temperature.
Materials: Soil

ID: 00130
Dries soil samples at a controlled temperature.
Materials: Soil

ID: 00131
Dries soil samples at a controlled temperature.
Materials: Soil

ID: 00132
Dries soil samples at a controlled temperature.
Materials: Soil

ID: 00133
Dries soil samples in a heated vacuum chamber.
Materials: Soil

ID: 00134
Assesses capillary water rise in soil and the risk of subgrade wetting.
Materials: Soil

ID: 00135
Determines minimum void ratio of cohesionless soil for relative density calculations.
Materials: Soil

ID: 00136
Tests relative density of cohesionless soil with an electrically driven hammer.
Materials: Soil

ID: 00137
Measures free swelling of soil.
Materials: Soil

ID: 00138
Grinds soil for laboratory sample preparation.
Materials: Soil

ID: 00139
Pulverizes soil samples before laboratory testing.
Materials: Soil

ID: 00140
Analyses soil aggregates by shaking sieve sets.
Materials: Soil

ID: 00141
Heats soil samples and laboratory vessels during sample preparation.
Materials: Soil

ID: 00142
Provides sand-bath heating during soil sample preparation.
Materials: Soil

ID: 00143
Supports density testing of coarse soil particles.
Materials: Soil

ID: 00144
Determines particle-size distribution of fine soil by hydrometer analysis.
Materials: Soil

ID: 00145
Removes air by vacuum during sample preparation.
Materials: Soil

ID: 00146
Determines soil particle density by buoyancy weighing.
Materials: Soil

ID: 00147
Investigates swelling of natural and compacted soil during immersion.
Materials: Soil

ID: 00148
Assesses soil adhesion when investigating interaction with earthmoving equipment.
Materials: Soil

ID: 00149
Punches circular filters from filter paper.
Materials: Soil

ID: 00150
Tests soil shrinkage.
Materials: Soil

ID: 00151
Applies falling-ball impact loading to specimens.
Materials: Soil

ID: 00152
Collects soil samples.
Materials: Soil

ID: 00153
Determines the angle of repose of cohesionless soil.
Materials: Soil

ID: 00154
Measures soil suspension density during hydrometer analysis.
Materials: Soil

ID: 00155
Rapidly determines natural soil moisture and density.
Materials: Soil

ID: 00156
Measures clay soil disintegration rate in water.
Materials: Soil

ID: 00157
Assesses soil penetration resistance.
Materials: Soil

ID: 00158
Saturates soil specimens held in cutting rings before testing.
Materials: Soil

ID: 00159
Saturates soil specimens held in cutting rings before testing.
Materials: Soil

ID: 00160
Sieve soil during sample preparation and analysis.
Materials: Soil

ID: 00161
Sieve soil during sample preparation and analysis.
Materials: Soil

ID: 00162
Sieve soil during sample preparation and analysis.
Materials: Soil

ID: 00163
Separates soil into particle-size fractions.
Materials: Soil

ID: 00164
Separate soil material by particle size.
Materials: Soil

ID: 00165
Cut, trim, and transfer material during specimen preparation.
Materials: Soil

ID: 00166
Collects and transfers loose soil samples.
Materials: Soil

ID: 00167
Collects and transfers loose soil samples.
Materials: Soil

ID: 00168
Measures force in mechanical testing.
Materials: Soil

ID: 00169
Holds soil samples in the laboratory.
Materials: Soil

ID: 00170
Cuts and trims soil specimens.
Materials: Soil

ID: 00171
Holds samples during soil sampling.
Materials: Soil

ID: 00172
Holds soil samples during preparation.
Materials: Soil

ID: 00173
Determines soil particle density by the pycnometer method.
Materials: Soil

ID: 00174
Holds dried soil samples during cooling and storage in an enclosed space.
Materials: Soil

ID: 00175
Supports manual grinding of soil samples.
Materials: Soil

ID: 00176
Holds small soil samples.
Materials: Soil

ID: 00177
Cuts and holds soil specimens for sample preparation.
Materials: Soil

ID: 00178
Measures linear displacement during laboratory testing.
Materials: Soil

ID: 00179
Helps prepare a soil specimen in a cutting ring.
Materials: Soil

ID: 00180
Compacts soil specimens during test preparation.
Materials: Soil

ID: 00181
Weigh soil samples and support density investigations.
Materials: Soil

ID: 00182
Grinds laboratory samples to a specified fineness.
Materials: Soil

ID: 00183
Determines unconfined compressive strength of cohesive and semi-cohesive soil.
Materials: Soil

ID: 00184
Performs mechanical tests on pavement materials, including CBR and unconfined compression.
Materials: Soil

ID: 00185
Performs mechanical tests on pavement materials, including CBR and unconfined compression.
Materials: Soil

ID: 00186
Investigates soil compression under stepped pressure loading.
Materials: Soil

ID: 00187
Tests coarse-grained soil under triaxial loading with pressure and deformation monitoring.
Materials: Soil

ID: 00188
Determines coarse-grained soil compressibility from pressure-deformation behaviour.
Materials: Soil

ID: 00189
Dries soil samples at a controlled temperature.
Materials: Soil

ID: 00190
Dries soil samples at a controlled temperature.
Materials: Soil

ID: 00191
Dries soil samples at a controlled temperature.
Materials: Soil

ID: 00192
Dries soil samples at a controlled temperature.
Materials: Soil

ID: 00193
Dries soil samples at a controlled temperature.
Materials: Soil

ID: 00194
Dries soil samples at a controlled temperature.
Materials: Soil

ID: 00195
Dries soil samples at a controlled temperature.
Materials: Soil

ID: 00196
Dries soil samples at a controlled temperature.
Materials: Soil

ID: 00197
Determines particle-size distribution of fine soil by hydrometer analysis.
Materials: Soil

ID: 00198
Determines CBR bearing capacity of soil and base materials.
Materials: Soil

ID: 00199
Determines direct shear strength of soil specimens.
Materials: Soil

ID: 00200
Investigates dynamic soil properties through triaxial testing.
Materials: Soil

ID: 00201
Heats soil samples and laboratory vessels during test preparation.
Materials: Soil

ID: 00202
Determines direct shear strength of soil specimens.
Materials: Soil

ID: 00203
Provides heating during soil sample preparation.
Materials: Soil

ID: 00204
Investigates soil specimen compression under vertical pressure.
Materials: Soil

ID: 00205
Compacts soil specimens in laboratory molds using a falling hammer.
Materials: Soil

ID: 00206
Determines direct shear strength of soil specimens.
Materials: Soil

ID: 00207
Determines CBR bearing capacity of soil and base materials.
Materials: Soil

ID: 00208
Determines soil liquid limit using a dropping cup.
Materials: Soil

ID: 00209
Determines soil particle density by the pycnometer method.
Materials: Soil

ID: 00210
Measures soil resistivity and earth-system parameters.
Materials: Soil

ID: 00211
In-situ vane shear testing of saturated soft clay.
Materials: Soil

ID: 00212
Lightweight dynamic probing for construction site investigations.
Materials: Soil

ID: 00213
Lightweight dynamic penetrometer with a 10 kg hammer.
Materials: Soil

ID: 00214
Heavy-duty penetration test apparatus with a 63.5 kg hammer.
Materials: Soil

ID: 00215
Dynamic cone probing of existing pavement layers.
Materials: Soil

ID: 00216
Plate load assessment of soil foundation bearing capacity.
Materials: Soil

ID: 00217
Plate load assessment of compacted soil foundations.
Materials: Soil

ID: 00218
Loading and displacement measurement assembly with an 800 mm plate.
Materials: Soil

ID: 00219
Static penetration testing with optional vane shear use.
Materials: Soil

ID: 00220
Mobile CPT unit with anchorage and penetration systems.
Materials: Soil

ID: 00221
Tracked static penetration unit rated at 150 kN penetration force.
Materials: Soil

ID: 00222
In-situ CBR test apparatus, model BT STCBR-4.
Materials: Soil

ID: 00223
In-situ CBR test apparatus, model BT STCBR-2.
Materials: Soil

ID: 00224
Field resilient modulus testing assembly.
Materials: Soil

ID: 00225
Plate testing of roadbed soil and pavement layer resilient modulus.
Materials: Soil

ID: 00226
Plate testing of roadbed soil and pavement layer resilient modulus.
Materials: Soil

ID: 00227
Reaction frame for moulding unconfined test specimens.
Materials: Soil

ID: 00228
Sand replacement density test set with a 150 mm diameter.
Materials: Soil

ID: 00229
Sand replacement density test set in listed 100, 150 and 200 mm sizes.
Materials: Soil

ID: 00230
Balloon density apparatus with a 3000 ml capacity.
Materials: Soil

ID: 00231
In-situ soil density measurement by sand replacement.
Materials: Soil

ID: 00232
Digital soil hardness testing.
Materials: Soil

ID: 00233
Light drop weight testing of soil and rock in road construction.
Materials: Soil

ID: 00234
Hand soil augers and samplers in a carrying case.
Materials: Soil

ID: 00235
Soil penetrometer with a drop hammer.
Materials: Soil

ID: 00236
Hand auger for soil sampling and boring to a stated depth of 1–5 m.
Materials: Soil

ID: 00237
In-situ soil sampler, model BT STYZ-1.
Materials: Soil

ID: 00238
Stainless steel soil sampler with an extruding block.
Materials: Soil

ID: 00239
In-situ soil sampler with a 44 mm sampling diameter.
Materials: Soil

ID: 00240
Extractor for removing soil augers.
Materials: Soil

ID: 00241
Drilling machine with a stated drilling depth of 100 m.
Materials: Soil

ID: 00242
Crawler drilling machine with casing and DTH drilling parameters.
Materials: Soil

ID: 00243
Drilling machine with a stated depth of 15–20 m.
Materials: Soil

ID: 00244
Drilling machine with a stated maximum depth of 10 m.
Materials: Soil

ID: 00245
Three-instrument set for slurry property checks.
Materials: Soil

ID: 00246
Non-nuclear density and moisture measurement of compacted soil.
Materials: Soil

ID: 00247
Four-bladed vane shear apparatus, model BT STZSZ-2.
Materials: Soil
Try another search or reset the filters.

ID: 00056
For determining the shear resistance of rock and other materials.
Materials: Not assigned

ID: 00067
For testing rock under axial loading and confining pressure.
Materials: Not assigned

ID: 00074
For testing geosynthetic materials for vertical water permeability.
Materials: Not assigned

ID: 00110
For impact testing of a specimen in a cylindrical chamber.
Materials: Not assigned

ID: 00574
Investigates soil–geotextile interface friction and mechanical properties of geotextile materials.
Materials: Geosynthetics

ID: 00579
Assesses filtration compatibility between a geosynthetic material and a selected soil.
Materials: Geosynthetics
Try another search or reset the filters.
Equipment selected for your application, with agreed adaptations to standard instruments when needed.