
ID: 00111
Electrohydraulic specimen extruder BT STDT-2
For removing cylindrical specimens from moulds using axial force.
Materials: Soil
- Accepted specimen diameters
- Φ100,
Φ101.6, Φ102, Φ150, Φ152(mm) - Maximum stroke
- 230mm
Application
For removing cylindrical specimens from moulds using axial force.
The device is used during specimen preparation to separate a specimen from its mould while retaining its geometry. Appropriate support and extrusion pieces provide the required axial load path. Extraction is not itself a specimen strength test.
Check mould diameter and height, bearing surfaces, mechanism stroke and the required extraction force. Specify the mould type and specimen condition. Compatibility concerns the complete fixture arrangement, not just the nominal diameter.
Specifications
| Parameter | Value |
|---|---|
| Maximum axial output force | 150KN |
| Accepted specimen diameters | Φ100,Φ101.6,Φ102,Φ150,Φ152(mm) |
| Maximum stroke | 230mm |
| Lifting speed | 450mm/min |
Scope of supply
To be confirmed for the selected model. Standard supply, grips, fixtures and options are listed separately for the selected configuration.
