
ID: 00114
Electrohydraulic specimen extruder with overload protection BT STM-3
For removing cylindrical specimens from moulds using axial force.
Materials: Soil
- Specimen diameters
- Φ100,
Φ101.6, Φ102, Φ150, Φ152(mm) - Piston stroke
- 250mm
Application
For removing cylindrical specimens from moulds using axial force. Automatic unloading is provided in the event of overload. The worktable is made of stainless steel.
The device is used during specimen preparation to separate a specimen from its mould while retaining its geometry. Appropriate support and extrusion pieces provide the required axial load path. Extraction is not itself a specimen strength test.
Check mould diameter and height, bearing surfaces, mechanism stroke and the required extraction force. Specify the mould type and specimen condition. Compatibility concerns the complete fixture arrangement, not just the nominal diameter. Overload protection does not replace checking the permissible force for the mould and extrusion fixtures.
Specifications
| Parameter | Value |
|---|---|
| Maximum axial output force | 300kN |
| Specimen diameters | Φ100,Φ101.6,Φ102,Φ150,Φ152(mm) |
| Piston stroke | 250mm |
| Overload protection | Automatic unloading |
| Power supply | AC380V±10%,AC220V±10% |
Scope of supply
To be confirmed for the selected model. Standard supply, grips, fixtures and options are listed separately for the selected configuration.
