
Application
The machine is used during specimen preparation before laboratory testing. Both specimen diameter and height define the working format and must be checked together for mounting and machining.
Grinding finishes a prepared surface, while the finished end is assessed separately against the intended test requirements. Motor power does not establish specimen flatness or geometry.
Specify routine specimen diameters and heights, the required finish and available electrical supply. Agree the motor configuration and specimen retention; the published power alternatives should not be added into a total machine rating.
Specifications
| Parameter | Value |
|---|---|
| Specimen diameters | 50, 75, 100 mm |
| Specimen height | 47.5-215 mm |
| Grinding wheel speed | 3400 r/min |
| Motor power, published values | 1.7 / 2.6 kW |
| Dimensions | 550×420×700 mm |
Scope of supply
To be confirmed for the selected model. Standard supply, grips, fixtures and options are listed separately for the selected configuration.
