
Application
The machine grinds specimens that require prepared surfaces for subsequent testing. Cubes and cylinders have different working formats, so selection must follow the actual blank geometry.
Automatic feed applies to grinding. Cooling connects to a piped water supply; installation planning should therefore cover both water delivery and drainage.
When selecting the machine, agree the cylinder diameter, feed arrangement and finished-surface requirements. Define how the laboratory will check flatness and grinding quality: prepared end faces affect contact with the loading platens during the subsequent test.
Specifications
| Parameter | Value |
|---|---|
| Cubic specimen sizes | 50×50×50-150×150×150 mm |
| Cylindrical specimens, unit not stated | Ø50-Ø120 |
| Automatic feed | 0.04-0.12 mm |
| Surface finish, unit not stated | Ra 3.2 |
| Flatness, stated inspection range | ±0.05 mm (within 50; range unit not stated) |
| Grinding wheel diameter | 200 mm |
| Cooling | Connection to piped water |
Scope of supply
To be confirmed for the selected model. Standard supply, grips, fixtures and options are listed separately for the selected configuration.
