
ID: 00534
Electric mortar flow table BT STNLD-4
Assesses cement mortar workability from its spread after a series of drops.
Materials: Cement
Jolting-part mass4.35±0.15 kg
- Drop height
- 10±0.2 mm
- Table diameter
- 300±1 mm
Application
Mortar is prepared in a mould on the circular tabletop; the mould is then lifted and a drop cycle is applied. A motor drives the cam mechanism, and a digital counter stops the apparatus automatically at the end of the cycle.
Measure the spread separately after the cycle. Agree the mould, tamper, measurement method and sample preparation procedure; maintain consistent mixing and testing conditions when comparing formulations.
Specifications
| Parameter | Value |
|---|---|
| Jolting-part mass | 4.35±0.15 kg |
| Drop height | 10±0.2 mm |
| Table diameter | 300±1 mm |
| Mould diameters and depth | 70 and 100 mm; 60 mm |
| Tamper diameter and length | 20 mm; 200 mm |
| Drops per cycle | 25 |
| Cycle duration | 25 s |
| Supply voltage | 220 V |
| Supply frequency | 50 Hz |
Scope of supply
To be confirmed for the selected model. Standard supply, grips, fixtures and options are listed separately for the selected configuration.
