
ID: 00536
Electric mortar flow table BT STNLD-6
Determines cement-mortar flow from its spread after a prescribed drop cycle.
Materials: Cement
- Drop height
- 10±0.2 mm
- Table diameter
- 300±1 mm
Application
The table subjects a mortar specimen to a repeatable vertical drop action. A motor drives the cam mechanism, and the counter ends the selected cycle. The specimen spread is then assessed on the circular work surface.
Comparing mixes requires consistent preparation, mould filling and reading procedures. This helps distinguish changes in mortar flow from differences in how the test was performed.
Specify the test procedure, mould, tamper and spread measurement arrangement. Assess drop height, drop count and cycle time together when selecting the equipment.
Specifications
| Parameter | Value |
|---|---|
| Moving-part mass | 4.35±0.15 kg |
| Drop height | 10±0.2 mm |
| Table diameter | 300±1 mm |
| Mould diameters | 70 / 100 mm |
| Mould height | 60 mm |
| Tamper diameter | 20 mm |
| Tamper length | 200 mm |
| Drops per cycle | 25 |
| Cycle duration | 25 s |
| Power supply | 220 V, 50 Hz |
Scope of supply
To be confirmed for the selected model. Standard supply, grips, fixtures and options are listed separately for the selected configuration.
