
ID: 00538
Specific-surface tester BT 127
Evaluates cement-powder specific surface by air permeability.
Materials: Cement
Cell inside diameterØ12.7±0.05 mm
- Sample-bed height
- 15±0.5 mm
- Disc hole count
- 35
Application
Air passes through a prepared powder bed in the measuring cell. Bed preparation and cell geometry affect comparability, so prepare the test portion using the selected procedure.
The result supports laboratory control of cement fineness and comparison of samples prepared and measured under consistent conditions.
Agree the calculation procedure, powder-bed preparation and verification with an appropriate reference material. Check the perforated disc, filters and connection tightness.
Specifications
| Parameter | Value |
|---|---|
| Cell inside diameter | Ø12.7±0.05 mm |
| Sample-bed height | 15±0.5 mm |
| Disc hole count | 35 |
| Hole diameter, unit not stated | Ø1 |
| Disc thickness | 1±0.1 mm |
| Voltage | 220 V |
| Motor power consumption | Less than 15 W |
| Net mass | 3.2 kg |
Scope of supply
To be confirmed for the selected model. Standard supply, grips, fixtures and options are listed separately for the selected configuration.
