
ID: 00574
Investigates soil–geotextile interface friction and mechanical properties of geotextile materials.
Materials: Geosynthetics
Force capacity range0-10 kN
- Vertical loading pressure levels
- 100, 200, 300, 400 kPa
- Horizontal shearing rate
- 0.02-3 mm/min

ID: 00575
Investigates water flow through the material and drainage within its plane.
Materials: Geosynthetics

ID: 00576
Investigates water flow through geotextile normal to its plane.
Materials: Geosynthetics

ID: 00577
Investigates in-plane water drainage of geosynthetics and plastic drainage boards.
Materials: Geosynthetics

ID: 00578
Establishes adjustable water head for investigating vertical flow through geosynthetic material.
Materials: Geosynthetics
Electrical supply and power220 V/50 Hz±10%; 1.5 kW
- Dimensions
- 700×660×2000 mm
- Mass
- 120 kg

ID: 00579
Assesses filtration compatibility between a geosynthetic material and a selected soil.
Materials: Geosynthetics

ID: 00580
Investigates a geosynthetic specimen’s resistance to water passage under pressure.
Materials: Geosynthetics
Pressure adjustment range0~2.5 MPa
- Maximum pressure
- 2.5 MPa
- Stated accuracy
- 0.5%

ID: 00581
Investigates the water-flow capacity of plastic drainage boards.
Materials: Geosynthetics

ID: 00582
For investigating water drainage through geosynthetic drainage materials under a selected head and lateral pressure.
Materials: Geosynthetics
Maximum specimen length400 mm
- Specimen width
- 100 mm
- Adjustable head
- 0–400 mm

ID: 00583
Investigates shear resistance at a soil–geosynthetic interface under a selected normal pressure.
Materials: Geosynthetics
Horizontal driveStepper motor
- Force measuring range
- 0–10 kN
- Normal pressure
- 100 / 200 / 300 / 400 kPa

ID: 00584
For investigating geosynthetic friction by direct shear and pull-out from a test chamber.
Materials: Geosynthetics
Maximum shear load50 kN
- Shear-box dimensions
- 300×300×50 mm
- Pull-out chamber dimensions
- 250×200×200 mm

ID: 00585
Determines geosynthetic thickness under a selected presser-foot pressure.
Materials: Geosynthetics
Lever ratio1:6

ID: 00586
Determines geosynthetic thickness under a selected presser-foot pressure.
Materials: Geosynthetics

ID: 00587
Loads a restrained specimen to determine bursting or puncture resistance with the appropriate fixture.
Materials: Geosynthetics
Maximum load10000 N
- Force measuring range
- 0–10000 N
- Lifting speed
- 0–300 mm/min

ID: 00588
Measures force during tearing of a geosynthetic specimen held in test grips.
Materials: Geosynthetics
Maximum load10000 N
- Force measuring range
- 0–10000 N
- Lifting speed
- 1–300 mm/min

ID: 00589
For laboratory assessment of geosynthetic equivalent opening size using a sieve-type test assembly.
Materials: Geosynthetics
Amplitude8 mm
- Oscillation frequency
- 220 /min
- Strike frequency
- 150 /min

ID: 00590
Determines opening size of single-layer geotextile and similar materials by wet sieving.
Materials: Geosynthetics
Sieve inside diameter130 mm
- Vibration frequency
- 50 Hz
- Vibration amplitude
- 1.5 mm

ID: 00592
For assessing a plastic drainage strip core under compressive loading.
Materials: Geosynthetics
Applied pressure steps1, 50, 150, 250, 350, 450 kPa
- Sampler diameter
- 61.8 or 79.8 mm

ID: 00593
Conditions geosynthetic specimens at elevated temperature for oxidation ageing tests.
Materials: Geosynthetics
Temperature rangeRoom temperature to 150 °C
- Stated temperature precision
- 0.5 °C
- Number of specimens
- 20 pieces

ID: 00594
For exposing geosynthetic specimens to ultraviolet radiation under controlled conditions.
Materials: Geosynthetics
Light sourceUVA-340 or UVB-313
- Temperature range designation
- RT+10 °C — +70 °C
- Temperature fluctuation
- ±1 °C

ID: 00595
Assesses geosynthetic resistance to impact by a falling steel cone.
Materials: Geosynthetics
Drop height500±2 mm
- Annular clamp inside diameter
- 150±0.5 mm
- Cone angle
- 45°

ID: 00596
For conditioning geosynthetic specimens with automatic temperature and humidity control.
Materials: Geosynthetics
Temperature20 °C
- Compressor power
- 125 W
- Heater power
- 600 W

ID: 00597
Cuts circular material specimens for subsequent laboratory assessment.
Materials: Geosynthetics
Adjustable blade height0-25 mm