Tension/compression testing machines—Calibration and verification of the force-measuring system
Force-system calibration and verification
The model description does not specify the edition year.

An automatic 2000 kN press for determining the compressive strength of cement, concrete and rock. The specimen is loaded between compression platens, with computer control used to carry out the selected loading procedure.
In construction-material testing, the measured load is considered together with specimen dimensions and loaded area. Results are compared for specimens prepared and tested using the same procedure.
Selection considers specimen shape and dimensions, expected failure load and the chosen test method. Splitting, flexural and static modulus tests require separate fixtures and measuring devices. Suitability for these tests is confirmed for the agreed configuration. If deformation is to be assessed, specify its measurement arrangement beforehand; failure load alone is insufficient.
| Parameter | Value |
|---|---|
| Compression capacity | 2000 kN |
| Accuracy class | 1 |
| Compression test space | 320 mm |
| Force indication error | ±1% |
| Piston travel | 70 mm |
| Power supply | 380 V ±10% |
| Power | 1.1 kW |
| Control cabinet, L × W × H | 570 × 400 × 1250 mm |
| Test frame, L × W × H | 450 × 615 × 1350 mm |
| Mass stated in table | 800 kg |
Normative references stated in the technical description of this model.
Force-system calibration and verification
The model description does not specify the edition year.
To be confirmed for the selected model. Standard supply, grips, fixtures and options are listed separately for the selected configuration.