Tension/compression testing machines—Calibration and verification of the force-measuring system
Force-system calibration and verification
The model description does not specify the edition year.

A digitally indicating 2000 kN press for compression testing of cement, concrete and rock. A specimen is placed between compression platens and loaded to the endpoint specified by the test method.
In construction-material testing, the measured load is considered together with specimen dimensions and loaded area. Results are compared for specimens prepared and tested using the same procedure.
Selection considers force capacity, specimen dimensions, platen spacing and the required test-control procedure. Digital indication must not be treated as automatic servo control of loading. Splitting, flexural and static modulus tests are considered separately and need the corresponding fixtures and measuring devices. If deformation is to be assessed, specify its measurement arrangement beforehand; failure load alone is insufficient.
| Parameter | Value |
|---|---|
| Compression capacity | 2000 kN |
| Force indication error | ±1% |
| Compression test space | 360 mm |
| Compression platen dimensions | 290 × 230 mm |
| Rated hydraulic pump pressure | 50 MPa |
| Piston travel | 50 mm |
| Power supply | 380 V ±10% |
| Power | 1.1 kW |
| Test frame, L × W × H | 850 × 460 × 1500 mm |
| Mass stated in table | 650 kg |
Normative references stated in the technical description of this model.
Force-system calibration and verification
The model description does not specify the edition year.
To be confirmed for the selected model. Standard supply, grips, fixtures and options are listed separately for the selected configuration.