Tension/compression testing machines—Calibration and verification of the force-measuring system
Force-system calibration and verification
The model description does not specify the edition year.

An automatic 3000 kN press for compression testing of construction materials. It determines the strength of cement, concrete and rock specimens under increasing compressive load.
In construction-material testing, the measured load is considered together with specimen dimensions and loaded area. Results are compared for specimens prepared and tested using the same procedure.
The configuration is selected for the required force, specimen geometry and test-space dimensions. Loading is computer controlled. Splitting, flexural and static modulus tests need suitable fixtures and measuring devices and are specified separately from the basic compression test. If deformation is to be assessed, specify its measurement arrangement beforehand; failure load alone is insufficient.
| Parameter | Value |
|---|---|
| Compression capacity | 3000 kN |
| Accuracy class | 1 |
| Compression test space | 360 mm |
| Force indication error | ±1% |
| Power supply | 380 V ±10% |
| Power | 2.0 kW |
| Control cabinet, L × W × H | 1000 × 550 × 800 mm |
| Effective test width | 330 mm |
| Piston travel | 70 mm |
| Test frame, L × W × H | 540 × 675 × 1300 mm |
| Mass stated in table | 2000 kg |
Normative references stated in the technical description of this model.
Force-system calibration and verification
The model description does not specify the edition year.
To be confirmed for the selected model. Standard supply, grips, fixtures and options are listed separately for the selected configuration.